Time filter

Source Type

Zlín, Czech Republic

This article analyzes the legislative and technical requirements for electromagnetic compatibility of machinery for the production of sugar. Compliance with the EMC requirements is important in terms of the process of placing products on the market and also in terms of practical design and installation of machinery. Failure to comply with EMC requirements may lead to failure of machines and increase the risk of dangerous situations. The machinery (through their design – including electrical and electronic components) must comply with the requirements of Government Decree no. 601/2006 Coll., on technical requirements for products in terms of electromagnetic compatibility. These requirements are detailed in the relevant technical standards series CSN EN 61000-6. Exceptions are provided for fixed installations. Practical realization of the measurement of electromagnetic radiation and testing of electromagnetic susceptibility is the only way to properly verify the EMC parameters of machinery. © 2015, Listy Cukrovarnicke a Reparske.All Rights Reserved. Source

Hrivna L.,Mendel University in Brno | Chodurova M.,Mendel University in Brno | Buresova I.,Univerzita Tomase Bati ve Zline
Listy Cukrovarnicke a Reparske | Year: 2012

The effect of extra-root nutrition on sugar beet growth and development during vegetation period was examined in field trials. Simultaneously, yield and technological quality of tubers were evaluated. Sugar beet leaf area was increasing until August when it reached 715 grams per plant. Conclusively highest weight gains were noticed between 28th July and 12th August. By the end of the harvest, the weight of leaves was decreased to 550 grams per plant as the result of older leaves necrosis. The final leaf weight was in individual variants in range of 373 to 778 grams per plant. The highest weight was found in variant with magnesium application of Magnitra L fertilizer. High dynamics of root growth was recorded from 1st July to 12th August and from 8th September to harvest. The highest final tuber weight (1,274 to 1,601 grams) was observed after Carbonbor K, Carbonbor and Bortrac fertilizer application, i. e. boron application varieties. The highest yield was reached after sodium nitrate application, while the lowest was in control group. Treated groups got in average better outcomes than control group. Alpha amino nitrogen content was low, the lowest values were in average determined after higher boron content fertiliser application. Soluble ash content was in range of 0.33 to 0.42 %. The lowest one was in control group and the groups with boron application fertiliser. MB factor value was positive in all groups and the highest quality sugar beet was harvested in the groups with higher boron application. After yield results evaluation, two relationships were determined; a very strong relationship (with r = 0,834**) between MB factor and water-soluble ash values and a negative relationship (with r = -0,613**) between digestion and MB factor. Source

Hrivna L.,Mendel University in Brno | Pechkova J.,Mendel University in Brno | Buresova I.,Univerzita Tomase Bati ve Zline
Listy Cukrovarnicke a Reparske | Year: 2013

Within monitoring of sugar beet growing in Central Moravia region we focused on evaluation of dependence among selected quality parameters during vegetation period. A medium-strength negative relation between the weight of leaf area and sugar content was determined; this relatin was most distinct during the last sampling (r = -0.576**). The root weight did not have strong influence even et the end of vegetation, there was a weak negative relation in the course of the whole observation (r = -0.173 --0.366**). The anticipated dilution effect of the growing root weight causing digestion decrease was thus not proved. At the end of vegetation period a medium-strength relation was determined in the relation between the root weight and MB-factor which give ripeness of sugar beet (r = 0.468**). Relation between the root weight and soluble ashes reproduced the same results. There existed a medium-strangth positive relation between the soluble ashes and α-aminonitrogen there existed a middle strong positive relation in the second half of August (r = 0.389**) and especially in the first half of September (r = 0.506**). Source

Agency: Cordis | Branch: FP7 | Program: CSA-SA | Phase: AAT-2007-7.0-05;AAT-2007-7.0-06 | Award Amount: 1.50M | Year: 2007

The AeroPortal project is created by the merger of the two support actions AeroSME and SCRATCH. It is the prime objective of AeroPortal to support aeronautical SMEs in advancing their technology base and their competitiveness through participation in European RTD projects. This is done by creating a single point of reference for information and project opportunities and by providing a wide ranging direct support encompassing: - The support to help SMEs integrate both Level 1 and 2 proposals put forward by large companies; - The support to SMEs to set up their own project proposals. AeroPortal will set up, and maintain, an internet portal, which will be an exchange place where project ideas, offers and requests of technical capabilities, partner searches, etc. can be posted and supported by an interactive database containing profiles of European SMEs and offering effective search features. In addition to the virtual networking provided by the internet portal, AeroPortal will establish a permanent cooperation with all interested groups involved in support activities to aeronautical SMEs, such as SME clusters, National and Regional Associations, and also other funded Aeronautics Support Actions. These groups will be invited to become members of the AeroPortal Multiplier Group. AeroPortal will cover all 30\ countries associated to FP7. Particular effort will be paid in continuing to stimulate the participation of Member States with aeronautical R&D potential. The following measures will be implemented in AeroPortal: - Establishment of the Multiplier Group open to all Aeronautics SME associations and groups; - Set up and maintenance of an internet portal for SMEs including an interactive and dynamic SME database; - Organisation of and participation in 20 national/regional information days, of which 4 in Member States with aeronautical R&D potential; - 2 Technology Workshops to support the integration of SMEs in large industry-led Level 1 proposals; - Organisation of a Level 2 proposal matchmaking workshop prior the 3rd call; - Training of SMEs and Multipliers; - To audit and help SMEs to structure their corporate research (300 audits or re-audits are targeted); - To set up a list of product oriented expressed research needs from Aeronautical SMEs; - To service and submit in the 2nd and 3rd calls at least 40 collaborative RTD proposals initiated by SMEs. The duration of the project is 30 months, starting in December 2007.

Agency: Cordis | Branch: FP7 | Program: CSA-SA | Phase: FP7-PEOPLE-2009-NIGHT | Award Amount: 82.94K | Year: 2010

The common project of 8 partners Researchers Night 2010 in the Czech Republic wants to extend the success of the previous years events that attracted rather high awareness of media and thus enabled researchers to be presented to the public in an unusual way, exactly according to the goals of the European project as a whole. The project wants to play an important role in changing the current public attitudes towards researchers. It gives the researchers an opportunity to be introduced to the public as ordinary people who are involved in ordinary life in the same way as the others, as well as the chance to show the public how they contribute to the well-being of the society. The activities planned for the event will bring researchers and the public together, let them talk, cooperate and experiment. The visitors will discover that researchers work is not only interesting and exciting but it also gives results that we utilize in our everyday life. It will be shown that there is no need to be a genius to become a researcher, and particularly the young visitors should leave the event convinced that a scientific career could be a choice for them when they make decisions about their professional lives. To make as many people aware of the upcoming event and to communicate the message of the event also to non-comers, awareness campaign is planned for the project. The role of the European Commission in supporting this particular event will be explained and the EC will be presented as an institution that continuously and largely supports research Europe-wide.

Discover hidden collaborations