Time filter

Source Type

Allières-et-Risset, France

Tatarinov A.V.,RAS Topchiev Institute of Petrochemical Synthesis | Bilera I.V.,RAS Topchiev Institute of Petrochemical Synthesis | Avtaeva S.V.,Novosibirsk State University | Shakhatov V.A.,RAS Topchiev Institute of Petrochemical Synthesis | And 4 more authors.
Plasma Chemistry and Plasma Processing | Year: 2015

The experimental study of the degradation of gaseous dielectrics after processing in the dielectric barrier discharge (DBD) is presented. Two pure gases trans-CF3CH=CHF (HFO-1234ze(E)), perfluoroketone CF3C(O)CF(CF3)2 (C5K), and also the following mixtures 75 %HFO-1234ze(E):25 %N2, 12 %C5K:88 %N2, 18.5 %C5K:81.5 %dry air, 9 %C5K:57.5 %HFO-1234ze(E):33.5 %N2, 9 %C5K:56 %HFO-1234ze(E):35 %CO2 have been used as test-gases. A content of the decomposition products of the gases before and after a 5-h workout in the barrier discharge has been determined by means of the chromatography-mass spectrometry and gas chromatography methods. Dilution of C5K with dry air greatly increases the degree of conversion of the source gas in the barrier discharge. Dilution of HFO-1234ze(E) and C5K with nitrogen, and the use of ternary mixtures 9 %C5K:57.5 %HFO-1234ze(E):33.5 %N2 and 9 %C5K:56 %HFO-1234ze(E):35 %CO2 significantly reduces the degree of conversion of the mixture compared with the source gases in the barrier discharge. After the DBD processing of two test-gases a large quantity of toxic C3F6 was found in pure C5K, and also a large number of highly toxic CF3CCH was found in pure HFO-1234ze(E). The least amount of toxic products after the DBD processing was detected in mixtures HFO-1234ze(E):N2 and C5K:HFO-1234ze(E):N2. The mixture C5K:HFO-1234ze(E):N2 has the best features among studied mixtures. © 2015 Springer Science+Business Media New York Source

Discover hidden collaborations