Shahid Bahonar University of Kerman is a research institution and university of engineering and science in Iran, offering both undergraduate and postgraduate studies. Located in Kerman province of Iran, the university is among the top ten universities and research institutes in Iran, illustrating its high status in research and education.The Shahid Bahonar University of Kerman occupies an area of 5 million square meters, making it one of the largest universities in Iran and the region. The university has two major campuses in the city of Kerman and several smaller campuses spread out across the province of Kerman offering degrees in over 100 different specialties leading to B.A., B.Sc., M.A., M.Sc., D.V.M., or Ph.D. degrees. Although there has been some moves by the smaller campuses in the province to become independent universities, there are still strong ties between these newly established universities and The Shahid Bahonar University of Kerman.The college of art and architecture is Saba Faculty of Art and Architecture, named after Afzalipour's wife.Shahid Bahonar University of Kerman was appointed as the Center of Excellence by Iran's Ministry of Science and Technology in the field of Mathematics. In 1980 the Department of Mathematics was awarded the first doctoral degree in mathematics in all of Iran. Moreover the second and third doctoral candidates in mathematics awarded in the country were also graduates of this department. Wikipedia.
News Article | May 24, 2017
During the first quarter, which ran from February to April, Microdesk hired 24 new team members. New hires, such as Chris Fercho, AECO consultant, in Chicago, Paul Seletsky, senior solutions specialist, in New York City, and Bonyan Zolghadri, consultant, in San Francisco are key indicators of the company's momentum. All three consultants are renowned leaders and entrepreneurs who have joined the Microdesk team to share their knowledge and technical expertise with clients. "We pride ourselves on the ability to attract world class talent," stated Microdesk President and CEO Michael DeLacey. "Microdesk's latest hires reinforce our commitment to our clients, as well as build upon the strong team structure we already have in place. We're anticipating the rapid growth to continue in the upcoming years, as we pursue additional projects that aim to change the design and construction process." Microdesk strategically identifies talented individuals with specific technical experience, accompanied by active in-field experience. Microdesk also seeks to find a good balance of people who like to have fun and enjoy life, which is a big component of the company's culture. Paul Seletsky, AIA, views BIM as a catalyst toward positive transformations in the building industry, enabling architects and engineers to capitalize on visual augmentation for faster, iterative, design options, and cloud-based collaboration and services for improved construction management and energy analysis. He served as digital design director for noted architecture firms Skidmore, Owings & Merrill in New York, and KieranTimberlake in Philadelphia, from 2005-2010 and 2010-2012, respectively, where he spearheaded research and development efforts. Seletsky served as chair of the Technology Committee at the AIA New York's Center for Architecture from 2003-2013, and has managed, written, and lectured on design technology in both the public and private sectors. He is a registered architect and a graduate of The Cooper Union School of Architecture in New York. Chris Fercho, recently a principal at BCS IS|IT LLC with stops at Pierce Engineers and Structural Dimension, Inc, comes to Microdesk with previous management and consulting roles at esteemed organizations. His extensive experience in AutoCAD and Revit coupled with his project management skills allow him to assume the responsibilities of assessing business goals. Natural leadership and strategic planning skills permit him to effectively integrate the right mix of technology, processes, and training to address an organization's unique needs. Fercho understands that maintaining a long-term, successful BIM strategy requires the dedicated support of a partner to stay current on technology, troubleshoot issues, and look for additional opportunities to leverage BIM. He holds a degree in Construction Technology & Architectural Drafting from Waukesha County Technical College. Bonyan Zolghadri, formerly a BIM Coordinator for WSP | Parsons Brinckerhoff with preceding employment at Güzin İnşaat and Varjavand Consulting Engineers, enters Microdesk with an expertise in architectural design. His comprehensive knowledge of Autodesk Revit, Indigo Renderer and Lumion 3D paired with his expanding skill set in visual coding on Dynamo and Python enable him speed up the BIM process while minimizing errors in BIM management tasks. Zolghadri's specialty in BIM allows him to produce project and template set ups, perform BIM Model maintenance, conduct BIM Automation, and create related content. His passion for architecture and technology along with his vast knowledge of BIM has led him to successfully manage the digital data and workflows with high profile companies in the past. Zolghadri holds a Bachelor of Architecture degree in architectural engineering from Shahid Bahonar University of Kerman. Interested in joining Microdesk's team? Visit www.microdesk.com/about-us/careers. For more information visit: www.microdesk.com. Follow Microdesk on: LinkedIn Twitter Facebook About Microdesk: Microdesk is a technology consulting firm providing technical services for successful planning, design, construction, operations and maintenance of land and buildings. Combining vision with the latest Building Information Modeling (BIM), Virtual Design & Construction (VD&C), and Asset Management tools and the talent of Microdesk's consulting team, Microdesk aids clients in successfully managing the entire building and infrastructure project delivery process. Autodesk and ATC are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. To view the original version on PR Newswire, visit:http://www.prnewswire.com/news-releases/microdesk-expands-talent-acquisition-to-support-unprecedented-growth-300463138.html
Sheykhi A.,Shahid Bahonar University of Kerman |
Sheykhi A.,Research Institute for Astronomy and Astrophysics of Maragha RIAAM
Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics | Year: 2010
Scalar-field dark energy models like tachyon are often regarded as an effective description of an underlying theory of dark energy. In this Letter, we implement the interacting agegraphic dark energy models with tachyon field. We demonstrate that the interacting agegraphic evolution of the universe can be described completely by a single tachyon scalar field. We thus reconstruct the potential as well as the dynamics of the tachyon field according to the evolutionary behavior of interacting agegraphic dark energy. © 2009 Elsevier B.V. All rights reserved.
Rahnamaeian M.,Shahid Bahonar University of Kerman
Plant Signaling and Behavior | Year: 2011
Complicated schemes of classical breeding and their drawbacks, environmental risks imposed by agrochemicals, decrease of arable land, and coincident escalating damages of pests and pathogens have accentuated the necessity for highly efficient measures to improve crop protection. During co-evolution of host-microbe interactions, antimicrobial peptides (AMPs) have exhibited a brilliant history in protecting host organisms against devastation by invading pathogens. Since 1980s, a plethora of AMPs has been isolated from and characterized in different organisms. Nevertheless the AMPs expressed in plants render them more resistant to diverse pathogens, a more orchestrated approach based on knowledge of their mechanisms of action and cellular targets, structural toxic principle, and possible impact on immune system of corresponding transgenic plants will considerably improve crop protection strategies against harmful plant diseases. This review outlines the current knowledge on different modes of action of AMPs and then argues the waves of AMPs' ectopic expression on transgenic plants' immune system. © 2011 Landes Bioscience.
Gholamalizadeh E.,Shahid Bahonar University of Kerman |
Mansouri S.H.,Shahid Bahonar University of Kerman
Applied Energy | Year: 2013
The objective of this paper was to present a comprehensive analysis including analytical and numerical models which were developed to predict the performance of a solar chimney power plant in Kerman, Iran. The numerical model results including air temperature, velocity and electrical power output were validated by comparing with experimental data of the Manzanares prototype power plant. Also the mathematical model was verified with the practical power output of the Kerman pilot plant. Also in this paper, a novel approach to evaluate the influence of the site altitude on the potential of solar chimney power plants was presented and thereby a coefficient called altitude effectiveness was defined using Manzanares prototype geometrical parameters in different site altitudes. The developed model was applied to improve the performance of a solar chimney pilot power plant built in Kerman, Iran. Based on an approximate cost model, the thermo-economic optimal configurations of the pilot power plant were illustrated; and also it was found that the chimney diameter was the most important structural dimension to improve the performance of this pilot power plant. © 2012 Elsevier Ltd.
Darezereshki E.,Shahid Bahonar University of Kerman
Materials Letters | Year: 2011
In this research work, α-Fe2O3 nano-particles were prepared by direct thermal-decomposition of γ-Fe2O 3. Precursor powders (γ-Fe2O3) were synthesized by wet chemical method at room temperature and then, the precursors were subsequently calcined in air for 1 h at 500°C. Samples were characterized by thermal gravimetric analysis (TGA), X-ray diffraction (XRD), energy dispersive spectra (EDS), infrared spectrum (IR) and transmission electron microscopy (TEM), respectively. The XRD, EDS, and IR results indicated that the synthesized α-Fe2O3 particles were pure. The TEM image showed that the α-Fe2O3 nano-particles were spherical and 18 ± 2 nm in size. Magnetic properties have been detected by a vibrating sample magnetometer (VSM) at room temperature. The γ-Fe2O3 and α-Fe2O3 nano-particles exhibited a super-paramagnetic and weak ferromagnetic behavior at room temperature, respectively. Using the present method, hematite nano-particles can be produced without expensive organic solvent and complicated equipment. © 2010 Elsevier B.V.
Mohebbi A.,Shahid Bahonar University of Kerman
Journal of Molecular Liquids | Year: 2012
Nanofluids, a new thermal fluids, have scientific challenges because the existing theories underpredict their thermal conductivity. One way to calculate this parameter is equilibrium molecular dynamics (EMD). In the previous studies of EMD, the thermal conductivity of nanofluids was calculated by the autocorrelation function of the heat current through the Green-Kubo formula. The convergence of this function requires a large time, nevertheless convergence of integral may still be slow or not well behaved. In this study, a new method based on combination of equilibrium and non-equilibrium molecular dynamics simulation in a non-periodic boundary conditions was used to calculate the thermal conductivity. In this method, first the specific heat and the thermal diffusivity of a nanofluid were determined by EMD and non-equilibrium (NEMD) respectively. Then the thermal conductivity was calculated from the relation of thermal diffusivity with the constant volume specific heat. This approach was tested by the nanofluid of silicon nitride nanoparticles in a liquid argon. The CHARMM22 force field and the force field of silicon nitride were combined to perform the simulation. The nanoparticle was generated according to the data of X-ray crystallography. The results of simulation for the base fluid at different temperatures were compared with experimental data to check the accuracy of the MD modeling. The effects of temperature and nanoparticle loadings on the thermal conductivity were investigated. The results showed that the thermal conductivity increases with increasing the loadings and decreasing the temperature. The calculation of root mean square displacements for liquid argon showed that the thermal transport enhancement of the nanofluid was mostly due to the increased movement of liquid phase atoms in the presence of non-metallic nanoparticle. This finding was also confirmed by the analysis of the density profile of liquid atoms near the interface. Finally, the comparison of the results of this study with other researchers showed the kind of nanoparticle could not significant to increase the thermal conductivity of nanofluids. © 2012 Elsevier B.V. All rights reserved.
Bahrehmand D.,Shahid Bahonar University of Kerman |
Ameri M.,Shahid Bahonar University of Kerman
Renewable Energy | Year: 2015
In this research work, mathematical models are presented for single and two-glass cover solar air collector systems with natural convection flow. These models are based on an analytical solution of energy balance equations for various elements of collectors. The results obtained from the present work and the experimental results of other researchers are in good agreement. The effects of a tin metal sheet suspended in the middle of the air channel, longitudinal fins with rectangular and triangular shapes, and depth and length variations of the channel on energy and exergy efficiencies of solar air collectors are also investigated. The results show that the collector with two-glass covers has a better performance than a single-glass collector, and it is analytically preferred by the first and second laws of thermodynamics. The results also illustrate that the collectors with triangular fins are more efficient in terms of energy than those with rectangular fins. © 2014 Elsevier Ltd.
Beitollahi H.,Research Institute of Environmental science |
Sheikhshoaie I.,Shahid Bahonar University of Kerman
Electrochimica Acta | Year: 2011
This paper describes the development, electrochemical characterization and utilization of a novel modified molybdenum (VI) complex-carbon nanotube paste electrode for the electrocatalytic determination of isoproterenol (IP). The electrochemical profile of the proposed modified electrode was analyzed by cyclic voltammetry (CV) that showed a shift of the oxidation peak potential of IP at 175 mV to less positive value, compared with an unmodified carbon paste electrode. Differential pulse voltammetry (DPV) in 0.1 M phosphate buffer solution (PBS) at pH 7.0 was performed to determine IP in the range from 0.7 to 600.0 μM, with a detection limit of 35.0 nM. Then the modified electrode was used to determine IP in an excess of uric acid (UA) and folic acid (FA) by DPV. Finally, this method was used for the determination of IP in some real samples. © 2011 Elsevier Ltd. All Rights Reserved.
Shahid Bahonar University of Kerman | Date: 2010-07-03
The various embodiments herein provide a method and composition to produce an anti-corrosive layer. According to one embodiment herein, a titanium based sol is synthesized and deposited on a substrate, dried for 120 C. for 1 hour, calcinated upto 400 C. for 1 hour, doped with a corrosion inhibitor, dried and deposited a layer of hybrid silica sol and cured to obtain the anticorrosive layer. According to another embodiment, a surface pre-treatment coating has a composition comprising a titanium dioxide layer, a corrosion inhibitor doped on the titanium dioxide layer, a hybrid silicate layer deposited on the doped titanium layer to form a coating to provide an improved corrosion resistance and self-healing effect.
Kordzadeh A.,Shahid Bahonar University of Kerman
Renewable Energy | Year: 2010
The main problem in using photovoltaic (PV) systems is the low energy conversion efficiency of PV cells. The efficiency of PV cells will decrease significantly as the temperature of the cells exceed to a certain limit. In order to increase the efficiency, it is necessary to reduce the operating temperature of array. One of the ways for improving the system operation is cooling PV cells with a thin film of water. The aim of this research is to study the effects of nominal power of array and system head on the operation of system by using this method. For this purpose, a photovoltaic water pumping system is installed in Kerman city (Latitude: 30 ° 17′ and longitude: 57 ° 50′) and different methods examined to reduce PV cells temperature. The most effective way was chosen and used in set. This method is based on providing water for cooling cells by the pump itself. Experiments show that with decreasing of array nominal power and increasing in system head, the power generated by the array increases significantly. This increases the panel and total efficiency and therefore the pump flow rate. This method is ineffective as the array nominal power increases significantly. © 2009 Elsevier Ltd. All rights reserved.