Hsinchu, Taiwan
Hsinchu, Taiwan

Time filter

Source Type

Lin S.-J.,National Kaohsiung University of Applied Sciences | Li H.-H.,National Kaohsiung University of Applied Sciences | Chen Y.-C.,Sanyang Industry Co. | Chou Y.-C.,National Kaohsiung University of Applied Sciences
Advances in Mechanical Engineering | Year: 2015

Excessive solar energy can significantly increase interior temperatures and yield great energy demands for air conditioning. Whereas reducing energy consumptions is very crucial today, this article employs patterned glass technology which incorporates linear patterns throughout the exterior surface of glass to attenuate the solar effect on the interior thermal field based on theoretical and experimental studies. By periodically imposing linearly three-dimensional patterns over the outer surface of window glass, the analytical results indicate that the interior solar heat is able to be reduced, as the surface patterns increase the incident angle and/or decrease the solar energy loading on the patterned glass material. Moreover, the interior solar heat can be strongly affected by the pattern design. According to thermally measured results, the trapezoidal patterned glass having 3-mm-top-edged patterned members yields lower temperature on the interior surface of glass comparing with that for the trapezoidal patterns having 6-mm-top edges. Therefore, making the least non-sloped feature or flat plane appearing on the patterned glass helps decrease the interior temperature resulting from solar energy. © The Author(s) 2015.


Chang H.-T.,Sanyang Industry Co. | Huang C.-W.,Sanyang Industry Co. | Lin K.-H.,Sanyang Industry Co. | Hu W.-C.,Sanyang Industry Co.
SAE Technical Papers | Year: 2013

It is well know that better fuel economy, good drivability, lower cost are essential for motorcycle market in Asia. To meet these demands in the meantime is a challenge for engineers. Gas motion in cylinder has significant effects on engine combustion efficiency and stability. A simple gas motion control valve may be a solution to meet these demands. This paper examines the turbulence characteristics combustion and fuel consumption between swirl valve and tumble valve on an air cooled 150cc four valves scooter engine. Finally, the swirl valve and tumble valve respectively improve the fuel consumption about 12% and 17% in the partial load 4500rpm, 2bar BMEP engine operating condition. Copyright © 2013 SAE International.


Liu P.,Sanyang Industry Co. | Yu C.-W.,Sanyang Industry Co. | Ning Y.,Sanyang Industry Co.
SAE Technical Papers | Year: 2013

With the development of high compression ratio or large-size engine, the cranking torque is getting higher, which causes the durability problem of starting system. Specifically, the starting motor and the one-way clutch are the most frequently wore parts. This kind of durability problem is also occurred in Stop and Go system, due to its frequently restarting process. Therefore, it is possible by using decompression device to reduce the cranking torque and to enhance the endurance capacity of the starting system. Furthermore, by reducing the cranking torque, engineers can miniaturize the starting motor and choose smaller capacity battery, and it also makes easier for kick start. A 150cc scooter was chosen as the example. The design, analysis and measurement with centrifugal type decompression device (CTDD) were discussed in this study. The systematic design procedures and tools were also provided to develop the product quickly. Finally, this study developed a decompression device in which the cranking torque was successfully reduced 42% and the cranking noise was also highly suppressed. Copyright © 2013 SAE International.


Trademark
Sanyang Industry Co. | Date: 2010-01-19

vehicles, namely, automobiles, motorcycles, motorized carts for personal transportation for senior citizens, electric scooters, electric bicycles; personal watercraft, namely, personal jet boats; all-terrain vehicles, and parts and fittings thereof, namely, brake cables, clutch cables, fork bearings and races, fork dust boots, fork seals, handle bars, handle bar control levers, handle bar dampers, handle bar grips, brake calipers, brake pedals, brake rotors, front spacers, front dash panels, shift levers, headlight mounts, structural parts, engines for land vehicles, brake cylinder repair kits sold as a unit for land vehicles, brake cylinders, main brake cylinders, spoiler for vehicles, mudguards, braking systems for vehicles and parts thereof; transmissions for vehicles; wheels; land vehicle parts, namely, drive gears, drive belts, axles, shock absorbers; rearview mirrors; wheel bearing kits for use with land vehicles.


Trademark
Sanyang Industry Co. | Date: 2012-02-13

Vehicles, namely automobiles; Motorcycles, motorized carts for personal transportation for senior citizens, electric scooters, electric bicycles; Personal watercraft, namely, personal jet boats; All-terrain-vehicles, and parts and fittings thereof, namely brake cables, clutch cables, fork bearings and races, fork dust boots, fork seals, handle bars, handle bar control levers, handle bar dampers, handle bar grips, brake calipers, brake pedals, brake rotors, front spacers, front dash panels, shift levers, headlight mounts, structural parts, engines for land vehicles, brake cylinder repair kits sold as a unit for land vehicles, brake cylinders, main brake cylinders, spoiler for vehicles, mudguards, braking systems for vehicles and parts thereof; Transmissions for vehicles; wheels; Land vehicle parts, namely, drive gears, drive belts, axles, shock absorbers; Rearview mirrors; Wheel bearing kits for use with land vehicles.

Loading Sanyang Industry Co. collaborators
Loading Sanyang Industry Co. collaborators