Entity

Time filter

Source Type


Liu J.,China Tobacco Anhui Industrial Co. | Yang B.,Staff Development Institute of CNTC | Zhou Y.,Qinhuangdao Tobacco Machinery Co.
Tobacco Science and Technology | Year: 2014

Aiming at the problems of high breakage and poor processing durability of expanded cut tobacco by traditional CO2 expanded cut tobacco processing, a steaming preconditioning discharger was added next to the expansion tower, which moistened the tobacco as it left the tower. Steam was injected into the compartments in the airlock discharger through uniformly distributed nozzles, to allow the tobacco entering into the airlock being evenly humidified and loosed. The results of application showed that after improvement, the percentage of long strands and cut tobacco yield increased by 1.5 and 0.75 percentage points, respectively. Water stained tobacco was avoided in the process of humidifying. The processing durability of expanded cut tobacco was effectively improved, while the breakage of cut tobacco was reduced. Source


Huang K.-J.,Panyu Chukong Steel Pipe Inc. | Cao D.,Guangzhou University of Chinese Medicine | Pang J.-F.,Qinhuangdao Tobacco Machinery Co.
Suxing Gongcheng Xuebao/Journal of Plasticity Engineering | Year: 2010

Based on the characteristics of mechanical expander, feature analysis of cyclic stress acting on power transmission rod has been made and the value of fatigue limit of rod has also been evaluated. As a result of it, the fatigue safety factor of power transmission rod has been ascertained, and it plays an important role in the design of expanding technique which is used in the production of LSAW in the event of billet with high strength or thick wall. Source


Qi H.,Qinhuangdao Tobacco Machinery Co. | Chen S.,Hongta Tobacco Group Co. | Hou Y.,Qinhuangdao Tobacco Machinery Co.
Tobacco Science and Technology | Year: 2013

For eliminating the shortcomings associated with screening test in threshing and redrying line, such as tobacco degradation and time lag in detection, an online strips sampling and area measurement device was designed by incorporating threshed strips sampling and mechanically thin-layer spreading, image acquisition and computer processing technologies. The results of application showed that the absolute error of the device was below 2%, and detection duration shortened from 30 to about 10 minutes comparing with screening test. Source


Zhang Y.,Qinhuangdao Tobacco Machinery Co. | Yi B.,China Tobacco Yunnan Industrial Co. | Fan X.,Qinhuangdao Tobacco Machinery Co. | Yin C.,Hongta Tobacco Group Co. | And 4 more authors.
Tobacco Science and Technology | Year: 2015

As a solution to the higher breakage rate of strips caused by mechanical action and the intrinsic quality of strips affected by higher temperature in cylinder loosening and conditioning, a pre-loosening device was developed, wherein the vertically sliced tobacco block was subjected to bending and pre-loosened along the layers formed natureally during baling. The conditioning cylinder was modified by replacing the long spikers with octagonal short ones and divided into four functional sections responsible separately for loosening, spreading, conditioning and casing to facilitate following processing. The results showed that the outlet tobacco temperature was lower (≤53℃), the loosening rate of strips was over 99.5%, the average amount of tobacco scraps reduced from 86.5 to 79.6 kg/batch, and the average amount of tobacco dust decreased from 6.1 to 3.2 kg/batch. The new system effectively reduced the processing intensity, decreased the breakage of strips, promoted the uniformity of heating and conditioning, kept natural tobacco aroma, and improved the processing quality of strips. © 2015, Editorial Office of Tobacco Science & Technology. All right reserved. Source


Wang C.,Qinhuangdao Tobacco Machinery Co. | Zhang Y.,Qinhuangdao Tobacco Machinery Co. | Ren Q.,Qinhuangdao Tobacco Machinery Co. | Zhang G.,Shanghai Tobacco Group Co. | Fan X.,Qinhuangdao Tobacco Machinery Co.
Tobacco Science and Technology | Year: 2014

To remove the tobacco dust buildup on wall of cylindrical equipment in tobacco primary processing line, an automatic pneumatic cleaner was developed on the basis of aerodynamic principle of high speed air stream. From a small high-pressure fan, the high speed air stream injected on the inner wall of cylinder acted as a rotary air knife and cleaned the wall areas tended to build up tobacco dust. The results of application showed that after installing the cleaner in cut strips casing cylinder, the average amount of tobacco buildup on the cylinder wall reduced from 40.6 to 3.3 kg/shift. The cleaner has a self-cleaning function, and is simple in structure, it can clean cylinder walls and spikers effectively. Source

Discover hidden collaborations