Saint Petersburg, Russia
Saint Petersburg, Russia

Time filter

Source Type

Kovelenov N.Y.,OOO Virial | Bolotskikh S.V.,OOO Virial | Mikhailov S.V.,Kostroma State Technological University | Mikhailov A.S.,Kostroma State Technological University
Russian Engineering Research | Year: 2017

A method for comparing the wear resistance of disk mills with different flank geometry is outlined. Hard-alloy disk mills with a curvilinear flank surface characterized by improved wear resistance are developed. Test results are presented for disk mills with different flank sharpening. © 2017, Allerton Press, Inc.


Chuvil'deev V.N.,Novgorod State University | Boldin M.S.,Novgorod State University | Dyatlova Ya.G.,OOO Virial | Rumyantsev V.I.,OOO Virial | Ordanyan S.S.,Saint Petersburg State University
Russian Journal of Inorganic Chemistry | Year: 2015

Abstract A comparative study was made of the kinetics of the sintering of Al2O3/ZrO2/Ti(C,N) powders under hot pressing and spark plasma sintering conditions. It was found that the consolidation processes under identical hot pressing and spark plasma sintering conditions at low heating rates at the intense densification stage are characterized by identical kinetics and have equal activation energies. © 2015 Pleiades Publishing, Ltd.


Fedorov D.V.,OOO Virial | Semenov O.V.,OOO Virial | Rumyantsev V.I.,OOO Virial | Ordan'yan S.S.,Saint Petersburg State University
Russian Journal of Non-Ferrous Metals | Year: 2016

Shrinkage curves of alloys formed from the WC–8% Ni hard-alloy mixture activated by introducing 10% nanodimensional WC and charge without the additive in a temperature range of 800–1500°C are presented. The pore structure and microstructure of the samples at various stages of sintering are investigated. The peculiarity of densification of the modified alloy, which consists in the shift of the shrinkage curve into the lower temperature region, is revealed. This makes it possible to lower the temperature of the vacuumcompression sintering of alloy, form a finer grain structure, and attain high characteristics of hardness–wear resistance without worsening the strength characteristics. Physicomechanical properties and microstructure of compression-sintered samples made of VN8M activated alloy and standard VN8 alloy without additives are investigated. © 2016, Allerton Press, Inc.


Ordan'yan S.S.,Saint Petersburg State University | Rumyantsev V.I.,Saint Petersburg State University | Nesmelov D.D.,Saint Petersburg State University | Korablev D.V.,OOO VIRIAL
Refractories and Industrial Ceramics | Year: 2012

Boron-containing refractory oxygen-free compounds are used extensively for creating materials (ceramics) for different purposes. Systems based on them, promising for creation of functional and structural ceramics (coatings) for extreme service conditions, are analyzed. © 2012 Springer Science+Business Media, Inc.


Bogdanov S.P.,Saint Petersburg State University | Garshin A.P.,Saint Petersburg State Polytechnic University | Korableva N.Y.,OOO VIRIAL | Ponomarenko V.A.,OOO VIRIAL
Refractories and Industrial Ceramics | Year: 2015

Results are provided for a study of sintering and some properties of new SiC-sintered polycrystalline and SiC-composite materials. Materials are prepared by sintering silicon carbide nano-and micropowders in high-pressure equipment. SiC powders are used both in pure form and with titanium compound nanocoatings applied to them. © 2015 Springer Science+Business Media New York.


Savinykh A.S.,RAS Institute of Problems of Chemical Physics | Kanel G.I.,RAS Joint Institute for High Temperatures | Razorenov S.V.,RAS Institute of Problems of Chemical Physics | Rumyantsev V.I.,OOO Virial
Technical Physics | Year: 2013

The evolution of a shock compression wave in SiC ceramic is measured for determining the possible contribution of relaxation processes to the high-rate straining. No appreciable decay of the elastic precursor and other features of stress relaxation are revealed when the sample thickness changes from 0.5 to 8.3 mm, and the evolution of the compression wave corresponds to a simple wave. The measured values of the Hugoniot elastic limit (σHEL = 8.72 ± 0.17 GPa) and spall strength (σsp = 0.50-0.62 GPa) with allowance for the density of the ceramic are in conformity with the available data. © 2013 Pleiades Publishing, Ltd.


Savinykh A.S.,Tomsk State University | Garkushin G.V.,Tomsk State University | Razorenov S.V.,Tomsk State University | Rumyantsev V.I.,OOO Virial
Technical Physics | Year: 2015

The shock compression wave profiles in three modifications of boron carbide ceramic are studied in the compressive stress range 3–19 GPa. The Hugoniot elastic limit and the spall strength of the materials are determined. It is confirmed that the spall strength of high-hardness ceramic changes nonmonotonically with the compressive stress in a shock wave. © 2015, Pleiades Publishing, Ltd.

Loading OOO Virial collaborators
Loading OOO Virial collaborators