MSTU

United States
United States

Time filter

Source Type

Kazakov I.,Moscow State Technological University “Stankin“ | Krasnovskii A.,Moscow State Technological University “Stankin“ | Kutin A.,MSTU
IOP Conference Series: Materials Science and Engineering | Year: 2017

The experimental validation of the heat transfer and cure modeling results for 8-mm fiber-reinforced thermosetting composite reinforcement is reported in this article. The temperature and degree of cure of composite reinforcement are predicted using a two-dimensional heat transfer and curing model. The model uses the infrared radiant heating theory and takes into account the heat transfer between the composite rod and the surrounding air. The implicit finite difference method was used to solve the system of governing equations. The results obtained using mathematical model was compared to experimental data: the temperature field inside the composite reinforcement was measured by means of naked thermocouple; Differential Scanning Calorimetry (DSC) was used to measure the degree of cure of the final product. Calculated and measured temperature and degree of cure fields were in good agreement. © Published under licence by IOP Publishing Ltd.


Papusha A.,MSTU | Kazunin D.,Transas | Gontarev D.,MSTU | Vasilevich V.,MSTU | Kyalbieva S.,Gubkin Russian State University of Oil and Gas
Society of Petroleum Engineers - SPE Arctic and Extreme Environments Conference and Exhibition, AEE 2013 | Year: 2013

The methodology for the calculation of the durability and steadiness of the underwater pipeline shows that in the framework of the classical formulation of the problem of the durability of composite beam structures found numerical solutions suitable for engineering design techniques of underwater pipelines by the influence of distributed loads. There is concrete solutions for the offshore pipeline typical for arctic conditions and there are limits of applicability national and international standards for assessing the steadiness of gas pipeline to local flooding and collapse due to the impact of ice fields and ridges. Copyright 2013, Society of Petroleum Engineers.


Murashova V.E.,MSTU | Voloshchik T.E.,MSTU
Fibre Chemistry | Year: 2010

Experimental studies of migration of fibres from needle-punch material (material No. 2) in a clothing pack through the top of the fabric showed that the needle-punch density and depth must be increased and the needle-punch material must be positioned with the needle-exit side (back) toward the top fabric to prevent migration. © 2009 Springer Science+Business Media, Inc.


Polyakov A.E.,MSTU | Polyakov K.A.,MSTU | Trykov R.V.,MSTU | Seryakov I.N.,MSTU | And 2 more authors.
Fibre Chemistry | Year: 2010

A concept for building the structure and studying controllable electrotechnical complexes for manufacturing equipment that increase the efficiency of saving energy and resources by optimizing the speed regimes is proposed. Selection of the velocity diagram of transportation, spinning, and winding of synthetic fibres and nonwovens should precede the process study to determine the optimum regime indexes. © 2009 Springer Science+Business Media, Inc.


Polyakov A.E.,MSTU | Polyakov K.A.,MSTU | Pavlov N.K.,MSTU | Seryakov I.N.,MSTU | Kozlova L.A.,MSTU
Fibre Chemistry | Year: 2010

A block diagram of the mechanical part of the extruder drive was developed. The effect of the elasticity of the mechanical part of the extruder takeup shaft on the dynamic characteristics of the electric drive was determined. The ACS quality indexes characterizing the dynamic properties of the extruder control channel were obtained. © 2010 Springer Science+Business Media, Inc.


The role of phosphorus-nitrogen-containing pyrolytic additives in formation of polyunsaturated threedimensional structures in polyvinyl alcohol which stimulate coking in different stages of heat treatment is established. The possibility of obtaining unactivated carbon-fibre materials with high sorption activity from PVA fibre was demonstrated. © 2011 Springer Science+Business Media, Inc.


Zotikova O.N.,MSTU | Zotikov A.A.,MSTU
Fibre Chemistry | Year: 2011

Date are reported on production of chemical fibres and thread in Russia for 2000-2009. Production in 2009 is compared with the corresponding periods for 2008. The factors characteristic of the 21st century that affect the volume and structure of production of a number of chemical fibres and thread in Russia are reported. © 2011 Springer Science+Business Media, Inc.


Alexendrovich L.A.,MSTU
BIODEVICES 2013 - Proceedings of the International Conference on Biomedical Electronics and Devices | Year: 2013

Using the device bioPlux we can identify a set of user gestures, and based on them to create a multimodal interface. Gestures are selected so that they are not dependent on each other. The main goal of the research is to create a simple game which can be controlled by using different hand movements. Relevance of the topic from the practical point of view is determined by the need to create a software system that can use sign language interface in real time.


Ryzhkova E.A.,MSTU | Milekhin G.V.,MSTU
Fibre Chemistry | Year: 2011

The proposed methodology for practical implementation of a system for controlling the concluding stage of fabric production implies regulating movement of the fabric in each stage of the manufacturing process (quality-inspector's table, packaging, transport, batch former, warehouse) independently, but establishing overall control and coordinating movement in the individual stages, which is realized with zero-overshoot responses. © 2011 Springer Science+Business Media, Inc.


Ryzhkova E.A.,MSTU
Fibre Chemistry | Year: 2011

The mathematical tool examined can be used for constructing a system for controlling the movement of a fabric roll from the quality-inspector's table to the batch formation points for shipment to the customer. © 2011 Springer Science+Business Media, Inc.

Loading MSTU collaborators
Loading MSTU collaborators