Time filter

Source Type

An H.,Shihezi University | An H.,Key Laboratory for Agricultural Machinery of Xinjiang Production and Construction Corps | Kan Z.,Shihezi University | Kan Z.,Key Laboratory for Agricultural Machinery of Xinjiang Production and Construction Corps | And 9 more authors.
Journal of Food, Agriculture and Environment | Year: 2015

In order to improve the performance of the plastic film separator for mechanical plucking of unginned cotton, the aim was to find out the optimal combination of influential factors that affect the performance of the separator. The effects of separator with the working parameters of this machine were investigated by enforced optimization experimental study which used the orthogonal test method and was based on the influence factors including skew barrel’s (angle of slope channel) angle, rotation speed of big mesh-roller, skew barrel’s entrance air speed and netty roller axis’s (the axis of the mesh-roller) horizontal included angle. Experimental results indicated that when skew barrel’s angle was 30°, big netty roller’s rotation speed was 80 r·min-1, entrance air speed was 17 m·s-1, and netty roller axis’s horizontal included angle was 36°, the isolating effect of this machine was best and could fulfill the working demand. © 2015, World Food Ltd. and WFL Publishers. All rights reserved.


Ding Z.,Shihezi University | Ding Z.,Key Laboratory for Agricultural Machinery of Xinjiang Production and Construction Corps | Zhang R.,Shihezi University | Zhang R.,Key Laboratory for Agricultural Machinery of Xinjiang Production and Construction Corps | And 2 more authors.
Food Analytical Methods | Year: 2014

LabVIEW IMAQ Vision is potentially useful for inspecting food and agricultural products since it combines the merits of both LabVIEW and IMAQ Vision, which have graphical programming environment and rich image processing functions. This paper provides profound introduction to LabVIEW IMAQ Vision: the principal components of LabVIEW IMAQ Vision, calibration, and image processing and analysis using VIs functions are described. In addition, recent advances in the application of LabVIEW IMAQ Vision to food and agricultural products inspection are reviewed, such as defects detection, shape classification, fruit grading and quality evaluation, etc. Finally, current limitations and likely future development trends are discussed. And the results of discussion showed that the utilization of IMAQ Vision module is restricted by the hardware environment, and mixed programming with LabVIEW and MATLAB is the development trend of LabVIEW IMAQ Vision. © 2014, Springer Science+Business Media New York.


Yin Z.,Shihezi University | Yin Z.,Key Laboratory for Agricultural Machinery of Xinjiang Production and Construction Corps | Zhang R.,Shihezi University | Zhang R.,Key Laboratory for Agricultural Machinery of Xinjiang Production and Construction Corps | And 10 more authors.
Applied Mechanics and Materials | Year: 2013

To effectively monitor the operation of feeding conveyer in automatic tomato selection assembly line and to avoid loss caused by machine's breakdown, monitor control system was designed for the production line. The hardware circuit was designed using LOGO as the core control device, then the software was development. And two working modes (automatic start and manual start) were assembled in the system. Finally, the system was tested in the tomato automatic sorting assembly line. The results indicate that the system can start the machine quickly and respond immediately to break-down. © (2013) Trans Tech Publications, Switzerland.


Cong T.,Shihezi University | Cong T.,Key Laboratory for Agricultural Machinery of Xinjiang Production and Construction Corps | Kan Z.,Shihezi University | Kan Z.,Key Laboratory for Agricultural Machinery of Xinjiang Production and Construction Corps | And 7 more authors.
Applied Mechanics and Materials | Year: 2013

Due to the limited capacity of cotton-processing factory, machine-collecting cannot make sure the process progressing in time and will cause a bad heat dissipation of cotton or a high temperature and humidity. A cotton temperature and humidity wireless monitor is designed to solve the problem. In our experiment, we find that the collecting holes of the collecting tube play the most important part in the data collection. Comparison is made about the performance between round holes and diamond holes using FLUENT, we get the result that the diamond holes have a better collecting effects and a higher collecting accuracy. © (2013) Trans Tech Publications, Switzerland.


Liang R.,Shihezi University | Liang R.,Key Laboratory for Agricultural Machinery of Xinjiang Production and Construction Corps | Cong J.,Shihezi University | Cong J.,Key Laboratory for Agricultural Machinery of Xinjiang Production and Construction Corps | And 6 more authors.
Applied Mechanics and Materials | Year: 2013

The paper was conducted to solve the low machining accuracy of eccentric parts and thin-walled parts on tomato harvester, reduce the machining steps of thin-walled parts and eccentric parts, and promote the machining accuracy and labor productivity, a special fixture was designed. High concentricity machining was applied based on adjusting the fixture, and manufacturing workpiece didn't need to dismount, thus the concentricity and machining accuracy of manufacturing workpiece can be achieved. It's beneficial to improve productivity and production quality. © (2013) Trans Tech Publications, Switzerland.

Loading Key Laboratory for Agricultural Machinery of Xinjiang Production and Construction Corps collaborators
Loading Key Laboratory for Agricultural Machinery of Xinjiang Production and Construction Corps collaborators