Jiangsu Sunshine Group Co.

Chengjiang, China

Jiangsu Sunshine Group Co.

Chengjiang, China
SEARCH FILTERS
Time filter
Source Type

Hua Y.,Jiangsu Sunshine Group Co. | Tao Y.,Jiangsu Sunshine Group Co. | Li J.,Jiangsu Gangyang Industry Co.
Wool Textile Journal | Year: 2017

The main purpose is test and optimization of process parameters of spinning process in the production of high count wool products. Using Minitab software and Tian - Qou method, experimental design and comparison on the Spinning section' technological parameters and on high count wool products, the two continuous data are analyzed by using the fine end index and the slub index, in which the fine end index and the slub index are required for the smaller the better. According to the test results, through the statistics analysis and comparison, for obtaining a more reasonable span yarn process parameter of various parts is suitable for spinning high count wool products, to improve the high count wool product quality and production efficiency through the spinning process parameters optimization of high count wool products.


Tao Y.,Jiangsu Sunshine Group Co. | Hua Y.,Jiangsu Sunshine Group Co.
Wool Textile Journal | Year: 2017

This article mainly detailed analyses the multiple woollen cloth feedback defects which may be produced during double twisting stage. These defects mainly have following forms; strong twisted yarn, soft twisted yarn, untwisted yarn, large twisted irregularity yarn, low strength yarn, much fibrous yarn and small braided yarn, etc. Regarding these seven kinds of defective cloth, possible causes and potential approaches are presented through the standardization of operation, the reasonableness of process parameters and the status of spindle equipment. Through a comprehensive analysis and scientific treatment to these defects, occurrence of defects would be reduced or even eliminated, resulting to decrease the quality degrading possibilities due to these actions.


Lu Y.-L.,National Textile Quality Supervision Testing Center Jiangyin | Yang H.-J.,Jiangsu Sunshine Group Company | Liang H.E.,Jiangsu Sunshine Group Company
Wool Textile Journal | Year: 2014

FZ/T 20026-2013 "Test method for fibre length and diameter of wool top & slivers -Optical analyser" has been officially released, as an important wool length and diameter testing method of tops, this paper introduces the design process of the standard. By organizing domestic round test and analysis of test results, determine technical details of the test method. The establishment of the method has a positive role in promoting the understand of the current advanced wool length and diameter testing methods, and enhance the level of wool industry product quality control. On the other hand, understand the working principle and test accuracy of optical analyser for wool top length and diameter, has a certain role in promoting the work of development of the domestic related test equipment.


Chen M.,Jiangsu Sunshine Group Co. | Cao J.-N.,Jiangsu Sunshine Group Co.
Wool Textile Journal | Year: 2013

This article introduced the design and production, key technique and the quality of silk and cashmere woollen fleece. This fabric was made by 50% cashmere and 50% silk. They were blended after fibre dyed separately. The yam size was very high and reaches 13. 3 tex,but the weight was only 300 g/m. It mainly discussed the process flow and the technique issues need to be dealt with during the process of fiber dyeing, spinning, weaving and finishing. The test result showed that the physical indexes and the colour fastness of the fabric can meet the requirements specified in the standard of woollen cashmere products. It was light in weight,good in warmth retention and could be used to make garments for spring, autumn and winter.


Hua Y.-L.,Jiangsu Sunshine Group Co. | Chen L.-F.,Jiangsu Sunshine Group Co.
Wool Textile Journal | Year: 2013

In this paper, some comparative spinning tests have been done with the same batch of superfine wool which has the different length produced in different production parameters. According to the change in the length of the wool fibers, using the same spinning process on the same model of machine, it tested and analyzed all the quality indicators during the spinning process such as the yam breakage rate, yam CV, yam thin, yam thick, nep, filoplume, strength and so on. Through comprehensive comparative tests, it was found that superfine wool fiber length affects almost all the yam quality indicators, which mean that the superfine wool length had important impact on the spinning parameters, so that a new method for improving yam quality was discussed.


Xu Y.,Jiangsu Sunshine Group Co. | Fei G.-D.,Jiangsu Sunshine Group Co. | Gui M.-S.,Jiangsu Sunshine Group Co.
Wool Textile Journal | Year: 2013

Combined with the advanced open width washing and crabbing equipment and air hammerblow equipment, an innovative wet finishing technological process for worsted fabric is developed; raw fabric→singeing→open width washing and crabbing→air hammerblow→(drying). Compared with the traditional wet finishing technological process for worsted fabric (raw fabric → singeing → single crabbing→ rope washing→ double crabbing→ drying), the new wet finishing technology can save 80% water, 80% steam, 55% electric power and reduce 80% waste emission.


Zhou S.-Y.,Jiangsu Sunshine Group Co. | Fang L.U.,Jiangsu Sunshine Group Co. | Li-e Z.H.U.,Jiangsu Sunshine Group Co.
Wool Textile Journal | Year: 2014

This paper introduces the characteristics of Australian wool, polyester, T-400 elastic filaments and cooimax moisture absorbing and sweat discharging fibers. The successful development of multi-compostion moisture absorbing and sweat discharging fabrics greatly embodies advantages of various fibers, good elasticity, drape, moisture absorption, good washability and quick drying. During spinning processes, had compared the two T-400 elastic filaments' yam spinning approaches with each other, we chose twisterassembled yams which has little affects on fabric face. The fabric smoothness and flatness then is improved. Cooimax fibers and T-400 elastic filaments is sensitive to heat and easy to color change. The finishing process is optimized and typing and steaming processes are adjusted, finally we improved thehydrophilic additives to enhance the fabric moisture absorption performances row colldry capacity.


Xu Y.,Jiangsu Sunshine Group Co. | Fei G.-D.,Jiangsu Sunshine Group Co. | Wang L.-X.,Jiangsu Sunshine Group Co.
Wool Textile Journal | Year: 2014

This paper describes the characteristics of wool fibers and felting mechanism, introduces " addition" and "subtraction" and many other methods for wool anti-felting finishing, and comparatively analyses the advantages and disadvantages of a variety of methods. For the performance of permanent press for worsted fabrics, such as shrinkage after machine washing, the deformation after watering, fabric smoothness appearance after washing, the fabric crease recovery, pleated appearance after washing, etc. , via the scientific process design, optimize the finishing process for worsted fabrics, screen the functional finishing auxiliaries for anti-felting, setting, combine with "subtraction" and "addition" processes, select the unique approach of "priming method" , successfully improve the technology for easy care and permanent press for worsted fabric, ensure the softness and excellent performance for the fabrics.


Fei G.-D.,Jiangsu Sunshine Group Co. | Zhao L.-P.,Jiangsu Sunshine Group Co. | Yang H.-J.,Jiangsu Sunshine Group Co.
Wool Textile Journal | Year: 2015

The paper elaborates on fabric designs and finishing production processes of super black pure wool fabrics, highlighting design ideas, production characteristics and production difficulty, especially KROY treatment, dyeing process, black enhancing process and steaming process in the finishing proceses period, reflecting the uniqeness of super black fabric production. The finished fabrics has high added value, having smooth and soft handfeel with exotic black shade, also the anti-static performance and wrinkle recovering performanceare are excellent. The super black fabrics achieve all national standards after a series of tests. The super black fabrics meet customer's demands on both fabric quality and inner physical performances. The super black fabric has great success in the market with a lot of orders from various customers.


Tao H.-Y.,Jiangsu Sunshine Group Co. | Zhao H.-H.,Jiangsu Sunshine Group Co. | Cao Y.-H.,Jiangsu Sunshine Group Co.
Wool Textile Journal | Year: 2015

This paper divided the double-filled wool fabric into two categories; warp filled and weft filled, elaborated on the structure of the fabric and the functions of the filled yarn, listed the quality problems which are easily appears during the production, analyze the causes, propose improved program, by analyzing and comparing the test results, proved the effectiveness of the improved program, to provide a reference for the design and production of the double-filled wool fabric.

Loading Jiangsu Sunshine Group Co. collaborators
Loading Jiangsu Sunshine Group Co. collaborators