Jiangsu Fengdong Thermal Technology Co.

Dazhong, China

Jiangsu Fengdong Thermal Technology Co.

Dazhong, China
SEARCH FILTERS
Time filter
Source Type

Li Q.,Beijing Institute of Technology | Xiang J.,Jiangsu Fengdong Thermal Technology Co. | Peng B.,Beijing Institute of Technology | Ren S.,Inner Mongolia North Heavy Industries Group Co.
Jinshu Rechuli/Heat Treatment of Metals | Year: 2015

The developing essentials and implementing points of GB/T 30824-2014 “Testing method for temperature uniformity of gas heat treatment furnace” are introduce, the differences of the temperature uniformity testing standard with GB/T 9452 and AMS 2750E are pointed out, and the application effect of the standard is analyzed by field tests. It provides implementation guide for gas heat treatment furnace testing, and will be helpful to the promotion and application of the GB/T 30824-2014 standard. © 2015, Chinese Mechanical Engineering Society of Heat Treatment. All right reserved.


Wang Y.,Jiangsu Fengdong Thermal Technology Co. | Wang S.-M.,Jiangsu Heat Treatment and Surface Modify Technology Research Center | Wei X.-R.,Jiangsu Fengdong Thermal Technology Co. | Shi G.-Y.,Jiangsu Fengdong Thermal Technology Co. | Chen Y.-F.,Jiangsu Fengdong Thermal Technology Co.
Jinshu Rechuli/Heat Treatment of Metals | Year: 2010

Primary structural and present manufacture of heavy pit furnace were summed up, features and development trends of non-retort pit furnace also were put forward. The dual-factors carbon potential control system and expert system used to simulate carburize progress in furnace were also introduced.


Li Q.,Beijing Institute of Technology | Xu Y.,Beijing Institute of Technology | Dong X.,Guangdong Strong Metal Technology Co. | Hu X.,Beijing Institute of Technology | And 2 more authors.
Jinshu Rechuli/Heat Treatment of Metals | Year: 2014

High energy consumption, heavy pollution, poor reliability and low control accuracy are the main shortcomings of heat treatment technology and equipment in our country recently. Perfection of the system of standards and formulation of relevant standards and codes are propitious to specification for the production of enterprises, especially in the heat treatment equipment manufacturing, make them have laws to abide, and can further reduce the energy consumption and pollution and improve the control precision and the reliability of equipment. In this paper, according to the characteristics of heat treatment production equipment, the evaluation index of clean energy saving heat treatment equipment were stipulated five indexes including basic requirements, technical requirements, reliability requirements, energy consumption and waste emission limit.


Shi Y.,Jiangsu Fengdong Thermal Technology Co. | Wang T.,Nanjing University of Aeronautics and Astronautics
Jinshu Rechuli/Heat Treatment of Metals | Year: 2014

A lead-free glass-ceramic coating to prevent surface oxidation of Ti-6Al-4V titanium alloy during heat processing was prepared, and phase compositions of the coating and the oxygen-enriched layer of Ti-6Al-4V specimens were investigated respectively. The results show that the phase compositions of the coating is glass before heating, and there is crystallization phases after heating which is benefit for coating spalling from the surface of titanium alloy, the oxygen-enriched layer thickness of the coated alloy is small. Thus the present glass-ceramic coating can provide better antioxidant protection to the alloy hot processing in the temperature range of 500-1000℃.


Wang K.,Shenyang Dongda Sensor Technology Co. | Zhang Z.,Jiangsu Fengdong Thermal Technology Co.
Jinshu Rechuli/Heat Treatment of Metals | Year: 2014

Sensors and intelligent instrument technology as a national development strategy were proposed in developed countries, and China also attaches great importance to the development of sensors and instruments, pay more attention to study on localization of imported sensor. This paper discusses in detail the development and application of multi use furnace, carburizing furnace, vacuum furnace special temperature sensor. The practice shows that the properties of domestic temperature sensor special for multipurpose furnace, carburizing furnace, vacuum furnace reaches the advanced level of similar products in the developed countries, that can completely replace the imported.


Shi Y.,Jiangsu Fengdong Thermal Technology Co.
Jinshu Rechuli/Heat Treatment of Metals | Year: 2014

Combined with the international standard ISO/IEC 17025:2005 “testing and calibration laboratory capacity of general requirements” and the laboratory management features for heat treatment test, the accurate, impartial and scientific management of laboratory test and how to ensure the laboratory detectability and test quality and how to promote the total quality control of heat treatment organization were expounded in details. ©, 2014, Chinese Mechanical Engineering Society of Heat Treatment. All right reserved.


Han B.,Jiangsu Fengdong Thermal Technology Co.
Jinshu Rechuli/Heat Treatment of Metals | Year: 2012

BBHG-5000 large pre-vacuum batch furnace is applicable to the precise carburizing and quenching processing of large size parts. The temperature and atmosphere controlling is better than the normal pit or batch furnace, it can efficiently reduce the inner grain oxidation and part distortion. Due to the pre-vacuum front chamber construction, the furnace operation is much more safe, and the chemicals consumption is greatly reduced. It is a new type large furnace with "safety, energy saving and friendly environment".


Shu D.,Jiangsu Fengdong Thermal Technology Co.
Jinshu Rechuli/Heat Treatment of Metals | Year: 2016

Heating parameter and circulating air volume of CTF-2000 through-type tempering furnace were optimal designed. The results show that during the process, reduce the unnecessary space except the trays in heating room as much as possible, and enlarge coefficient of reservation of air amount, which make tempering furnace meet the customer requirement of (150±7.5)℃ for 51 min. © 2016, Editorial Office of "Jinshu Rechuli". All right reserved.


Zhang Z.,Jiangsu Fengdong Thermal Technology Co. | Wu Y.,Jiangsu Fengdong Thermal Technology Co.
Jinshu Rechuli/Heat Treatment of Metals | Year: 2014

The application of network technology on heat-treatment equipments is expounded from requirement background, implement methods and effects, such as local process programming, monitoring, data record transferring, video monitoring and remote video monitoring, equipment monitor, and maintenance, etc. These applications can make the heat treating work become more efficient and fast.


Zhang Z.,Jiangsu Fengdong Thermal Technology Co. | Wu Y.,Jiangsu Fengdong Thermal Technology Co.
Jinshu Rechuli/Heat Treatment of Metals | Year: 2013

The development tendency of carbon potential controller, such as general utilization of controlling components, visual programming, control and records integration, cases online control, remote monitoring, double carbon potential sensors input and multi-loop carbon potential control and other functions is introduced. The development background, main features and development prospect were described, which will be convenient to those heat treatment practitioners in designing and choosing carbon potential controller. The development and application of these new technologies will be helpful to realize the carburizing process of intelligent control, fully guarantee the product quality, and reduce production cost.

Loading Jiangsu Fengdong Thermal Technology Co. collaborators
Loading Jiangsu Fengdong Thermal Technology Co. collaborators