Izhevsk State Technical University

inter.istu.ru/
Izhevsk, Russia

Izhevsk State Technical University is a university in Izhevsk, Russia. The university can be abbreviated as IzhSTU . It was founded in 1952 in the period of intensive industrial development when there was an increasing demand in highly qualified engineers, capable of managing production processes. On the date of its 60th anniversary it was named after the legendary small arms designer Mikhail Kalashnikov.At present Kalashnikov ISTU is a leading higher educational institution in the region and one of the leading technical schools in Russia, a training center of engineers and academics.Kalashnikov Izhevsk State Technical University is a signatory of Magna Charta Universitatum in Bologna, Italy and a full member of European University Association . 6 bachelor and 1 master study programs of Kalashnikov ISTU have been accredited by Central Evaluation and Accreditation Agency , Hannover, Germany with the possibility to issue internationally recognized diploma supplements.Kalashnikov ISTU has 5 branches in towns of Udmurt Republic and neighboring regions, namely: Votkinsk, Sarapul, Glazov, Kambarka and Tchaikovsky. Wikipedia.

SEARCH FILTERS
Time filter
Source Type

Semakina N.V.,Izhevsk State Technical University
International Journal of Nanotechnology | Year: 2017

Despite the fact that the demand for nanotechnology specialists is growing worldwide, nanotechnology-related jobs are still not in the top lists of young generations' dream jobs. If the situation remains the same, there will be a danger of stagnation in the development of nanoscale science and nanotechnology. To address this problem, we developed a new approach to natural science education in secondary schools, because, in general, people build their attitude towards sciences and make a career decision just at this particular educational stage. The paper presents a concept of development of a nanotechnology-oriented system of natural science education in secondary schools. The results of the implementation of the concept in Izhevsk Municipal Budgetary Educational Institution 'Lyceum No. 41' (Izhevsk, Russia) are reported. Copyright © 2017 Inderscience Enterprises Ltd.


Bozek P.,Applied Information Sciences | Turygin Y.,Izhevsk State Technical University
Measurement Science Review | Year: 2014

Submission is focused on completing the information system about quality, operation, automatic testing and new evaluating method of vehicle subsystem. Numeric analysis is carried out on the base of automatic collection and systematic recording of commercial car operation. Proposed new information system about operation and trial process allows verification according to the proposed method. Critical components verified in laboratory conditions are detected by numeric analysis of reliability. Quality level increasing not only for final product, but also related automatic test laboratory for cars is the result of respecting these principles. © by Pavol BoŽek.


Goldfarb V.,Izhevsk State Technical University
Mechanisms and Machine Science | Year: 2016

The paper presents a short history of the development of the theory of spiroid gears and gearboxes design in the Institute of Mechanics of Kalashnikov ISTU, and aspects of implementation and development of their production in the “Mechanic” Ltd. © Springer International Publishing Switzerland 2016


Trubachev E.,Izhevsk State Technical University
Mechanisms and Machine Science | Year: 2016

The paper describes methods of tooth generating by two-parametric families of generating lines (cutting tool edges) proposed for spiroid gears. Several general issues of tooth generating process by means of these families are considered. © Springer International Publishing Switzerland 2016.


Stepanov P.,Novouralsk Technological Institute | Nikitin Yu.,Izhevsk State Technical University
Mechatronics 2013: Recent Technological and Scientific Advances | Year: 2014

The paper presents diagnostics of mechatronic systems on the basis of AIbased techniques. The paper gives an analysis of diagnosis methods. Development of neural network for diagnosis of mechatronic systems are discussed. Diagnostics system software functions are determined. The input layer is used as the data acquisition unit on base National Instruments devices with LabView software. AI-based techniques for diagnostics are discussed. For diagnosis of CNC machines, a neural network can be applied, consisting of modules, which correspond to each CNC machines units. Each module processes the obtained information according to its diagnostic parameters. © Springer International Publishing Switzerland 2014.


Nikitin Y.,Izhevsk State Technical University | Abramov I.,Izhevsk State Technical University
Proceedings of 14th International Conference on Mechatronics, MECHATRONIKA 2011 | Year: 2011

One of the most important conditions of the effective automated production functioning is reliable operation. Modern process equipment offers mechatronic systems consisting of mechatronic modules. One of the possible ways of improving the process equipment reliability is the use of diagnostics. For making decisions about the technical condition it is advisable to use the fuzzy set theory, which adequately takes into account different uncertainties. © 2011 Univ of Trencin.


Plekhanov F.I.,Izhevsk State Technical University
Russian Engineering Research | Year: 2015

Research is conducted regarding the influence of the deformability of the cantilever shaft and the torsion of the central gear on the load distribution over the tooth crown of two-row satellites in a planetary transmission. The nonuniformity of the load distribution is determined by solving the equations for the total displacement, with allowance for the pliability of the components in the transmission and the manufacturing error. © 2015, Allerton Press, Inc.


Plekhanov F.I.,Izhevsk State Technical University
Journal of Machinery Manufacture and Reliability | Year: 2015

A method is considered to determine the axis compliance of a planetary pinion subject to the deformation of the carrier web. It is revealed that the deformability of the axis, its mating parts, and sun gear affects the load distribution over power flows and rims of a two-row pinion. Variation factors for the load distribution in gear meshes are determined by solving of sets of displacement compatibility equations including the compliance of gear units and by its preparation error. © 2015, Allerton Press, Inc.


Vozmishcheva T.,Izhevsk State Technical University
Astrophysics and Space Science | Year: 2016

The connection between the problems of celestial mechanics: the Kepler problem, the two-center problem and the two body problem in spaces of constant curvature with the generalized Kepler and Hooke potentials is investigated. The limit passage in the two-center and two body problems in the Lobachevsky space and on a sphere is carried out as λ→ 0 (λ is the curvature of the corresponding space) for the two potentials. The potentials and metrics in spaces under study are written in the gnomonic coordinates. It is shown that as the curvature radius tends to infinity, the generalized gravitational and elastic potentials transform to the Kepler and Hooke forms in the Euclidean space. © 2016, Springer Science+Business Media Dordrecht.


Nikitin Y.,Izhevsk State Technical University | Abramov I.,Izhevsk State Technical University
Proceedings of 13th International Symposium on Mechatronics, MECHATRONIKA 2010 | Year: 2010

Mechatronics is an exhaustive coverage of the various aspects from design to testing of high technology computer numerically controlled (CNC) machines. With the introduction of advanced features on CNC machines and with the introduction of flexible manufacturing system (FMS) and computer integrated manufacturing (CIM) diagnostic systems to detect wear and breakage assumed importance as the operation on such systems are normally unmanned or minimally manned. A large number of systems are available for automatic tool monitoring on CNC machines. The basic monitoring principles are as follows: registration of tool working hours, measurement of output power, measurement of cutting forces, geometric measurement of tools or products [1]. Need to diagnose not only tools, but also to diagnose the machine modules. For diagnostics of machines modules and elements is necessary to apply artificial intelligence (AI) techniques.

Loading Izhevsk State Technical University collaborators
Loading Izhevsk State Technical University collaborators