Instytut Technik Innowacyjnych EMAG

Poland

Instytut Technik Innowacyjnych EMAG

Poland

Time filter

Source Type

Grant
Agency: European Commission | Branch: FP7 | Program: CP | Phase: SEC-2010.6.3-3;SEC-2010.6.4-1 | Award Amount: 4.47M | Year: 2011

The Task of VALUESEC is defining, context modeling, weighting and quantifying attributes of costs and benefits, advantages and disadvantages of security measures, and demonstration of an application tool evaluating the different effects and the aggregated value of security measures. It will generate a knowledge base of the status and trends in theory and in practical applications of methods of economics applied to security decision making. The great challenge will be to combine economical (mostly quantitative) and societal effects (mostly qualitative) of security measures into a value function, one methodology framework and integrate it into a toolkit which will be flexible and user friendly, and applicable to a large spectrum of possible decisions in the security domain. Decisions supported by this tool will be more transparent and better rationalized than present. Project approach: - Problem Analysis and Requirements: Which typical problem classes should be addressed? Analyze and describe decision making processes and requirements for improvement. - Theories, Methodologies, Components: Which existing approaches to value and utility functions can be exploited to security decisions? Identification of innovation potential. - Design and usability: Which functions should the tool be capable to perform to provide for effective decision support? Define functionality, attributes and usable models and map them against identified problem classes - Development: How will the system work? Transformation of the models and utility function into applicable tools. - Evaluation: How do the implemented tools really work and help? Proof of the power and applicability of the tools in realistic use cases. - Dissemination and exploitation: How will findings and results be propagated and brought to practical use? How should research on security economics continue? Help pave the way to a future with more transparent and valuable security decisions.


Mocha J.,Instytut Techniki i Aparatury Medycznej ITAM | Woznica T.,Instytut Technik Innowacyjnych EMAG | Wojcik D.,Silesian University of Technology
Przeglad Elektrotechniczny | Year: 2015

The paper presents briefly amendments which have been made to the IEC 60601-1-2:2014 standard as compared to its the previous revision. The paper outlines also the consequences that result from these amendments and affect designers of medical equipment and research laboratories. The study ends up with presentation of results from investigations carried out in line with the new revision of the IEC 60601-1-2:2014 standard and intended to detect which degree of immunity to radio frequency electromagnetic fields is achieved by typical electric medical devices. © 2015, Wydawnictwo SIGMA - N O T Sp. z o.o. All rights reserved.


Wojcik D.,Silesian University of Technology | Mocha J.,Instytut Techniki i Aparatury Medycznej ITAM | Woznica T.,Instytut Technik Innowacyjnych EMAG
Przeglad Elektrotechniczny | Year: 2015

The issues of reducing radiated emissions in the double-layer printed circuit board with digital magnetic isolators from Analog Devices are discussed in this article. The effectiveness of the chosen radiation mitigation techniques are examined. Results from measurement of the electric field carried in the GTEM chamber are presented. © 2015, Wydawnictwo SIGMA - N O T Sp. z o.o. All rights reserved.


Mirek A.,Instytut Technik Innowacyjnych EMAG | Stanek M.,Wyzszy Urzad Gorniczy | Dzik G.,Instytut Technik Innowacyjnych EMAG
Prace Naukowe Instytutu Gornictwa Politechniki Wroclawskiej | Year: 2013

Blasting is a basic method of deposit mining in the open-pit mines. The paper presents legal and safety status for blasting during 1990-2012. Circumstances and causes of specific events occurring in such mine plants are given, related to the usage of blasting agents. The impact of various factors on the safety state during blasting are analyzed. The paper presents a brief characteristic of an apparatus used to monitor of hazardous zones and influence of blasting on environment, moreover conclusions from that analysis.


The article presents a method for determining the performance level (PL) on the basis of the PN-EN ISO 13849-1 standard, which is harmonized with the machinery directive 2006/42/EC. The risk assessment and risk reduction criteria, according to PN-EN ISO 12100, were briefly characterized. The focus was put on determining the required performance level PLr on the basis of a risk graph. The method was presented how to use a safety function composed of input-, logical-and execution subsystems. It was demonstrated how to determine the achieved PL for a safety function composed of hardware elements on the basis of a safety category, mean time to dangerous failures (MTTFd), diagnostic coverage (DC), and immunity to common cause failures (CCF).


Habrych M.,Wroclaw University of Technology | Tomczyk A.,Wroclaw University of Technology | Beben B.,Wroclaw University of Technology | Miedzinski B.,Instytut Technik Innowacyjnych EMAG
Przeglad Elektrotechniczny | Year: 2015

Paper discusses basic principles of BPL-PLC transmission paying attention to the limits of its effectiveness in practice. The one of the practical ways of modeling of the transmission channel using an electric power line is presented. The implementation of the relevant exploratory study on the on the use of the BPL transmission in the existing mining cable networks of MV has been described. Based on the research results the appropriate practical conclusions have been formulated. © 2015, Wydawnictwo SIGMA - N O T Sp. z o.o. All rights reserved.


Szczygielska M.,Instytut Technik Innowacyjnych EMAG | Mroz J.,Instytut Technik Innowacyjnych EMAG | Broja A.,Instytut Technik Innowacyjnych EMAG | Felka D.,Instytut Technik Innowacyjnych EMAG
Przeglad Elektrotechniczny | Year: 2012

The paper presents a method to monitor and detect fire hazards occurring during the operation of belt conveyors. The monitoring was based on new multi-detector sensors and a determined fire index. Additionally, two methods were used: the method based on physical characteristics of the development of a fire source and the fuzzy logic method. Finally, some examples were presented how to use fire indexes for the analysis of fire data acquired during tests and trials.


Kryca M.,Instytut Technik Innowacyjnych EMAG | Kozlowski A.,Instytut Technik Innowacyjnych EMAG | Pietrzak R.,Instytut Technik Innowacyjnych EMAG
Przeglad Elektrotechniczny | Year: 2012

This paper presents one of the aspects of embedded software design process. EMC certification is usually equated with hardware matter of device, but results of this evaluation are strongly interlinked with software. Influences of programming solutions on behavior of industrial measuring device being under EMC tests were described.


Cierpisz S.,Instytut Technik Innowacyjnych EMAG | Kryca M.,Instytut Technik Innowacyjnych EMAG | Sobierajski W.,Instytut Technik Innowacyjnych EMAG | Gola M.,Instytut Technik Innowacyjnych EMAG
Gospodarka Surowcami Mineralnymi / Mineral Resources Management | Year: 2016

A new monitoring system based on the monitoring of natural radiation emitted by the material in the separation zone of a jig compartment has been developed and tested in parallel with a radiometric density meter and a conventional float. The authors investigated the correlation between the separation density monitored by the meter and the intensity of the natural radiation. The measuring head of the radiometric density meter consists of a 137Cs radiation source and a detector in the form of a scintillation counter. The signal from the detector is measured over a period of 0.15 s at the end of each cycle of pulsations (1.2 s) when the material is compressed. The control systems were installed in the second compartment of the OM20-type jig. The aim of control was to stabilise the separation density at desired values. The separation process was monitored by a radiometric density meter (RDM) to indicate changes in the separation density over a given period of time. The R DM was installed close to the upper edge of the product overflow wall to measure the density of the material separation layer reporting in half to the product and in half to the refuse. A conventional float, indicating the position of the heavy fraction in the bed, was used as a basic sensor in the control system. After first experiments the RDM replaced the float as a main sensor in the closed loop control. In the third experiment a new monitor, based on the measurement of the natural radiation emitted by the material (NRM) accumulating below the product overflow wall was used. A good correlation between the NRM indications and the RDM measurements indicates that the radiometric density meter RDM can be replaced effectively by the NRM, especially in control systems where separation density is stabilised at desired values. © 2016 Gospodarka Surowcami Mineralnymi Mineral Resources Management. All rights reserved.


Bialas A.,Instytut Technik Innowacyjnych EMAG
Advances in Intelligent and Soft Computing | Year: 2012

The chapter features the concept of joint implementation of two widely used standards, BS 25999 concerning business continuity and ISO/IEC 27001 - information security, within one integrated management system. Business continuity is understood as a strategic ability of an organization to react to incidents and disturbances in its business functioning and to mitigate losses in case these harmful factors occur. Information security, in turn, is related to the protection of information integrity, availability and confidentiality. The chapter presents the assumptions and recently achieved results of a specific targeted project whose objective is to develop a computer-supported management system for organizations which set a lot of store by the continuity of business processes and information security. The works on the system model were summarized, including a feasibility study concerning different aspects of software which is developed on the basis of these models. © 2012 Springer-Verlag GmbH Berlin Heidelberg.

Loading Instytut Technik Innowacyjnych EMAG collaborators
Loading Instytut Technik Innowacyjnych EMAG collaborators