Shijiazhuang, China

Hebei Institute of Communication

www.hebic.cn
Shijiazhuang, China
SEARCH FILTERS
Time filter
Source Type

Zhang F.,China Institute of Technology | Geng B.,China Institute of Technology | Liu Z.,China Institute of Technology | Jia J.,Hebei Institute of Communication
QR2MSE 2013 - Proceedings of 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering | Year: 2013

This paper firstly presents analysis of outsourcers' critical behaviors of moral hazards in the principal-agent contract of Stage I, and then analysis of outsourcers' behaviorization of moral hazards in long-term cooperation. Finally, corresponding measures to inhibit outsourcers' behaviorization of moral hazards as for potentiality of outsourcers' behaviorization of moral hazards are provided. © 2013 IEEE.


Shi S.,Hebei Institute of Communication | Wei Y.-w.,Hebei Institute of Communication
Journal of Clinical Rehabilitative Tissue Engineering Research | Year: 2011

BACKGROUND: Study on the mechanism of adaptation to exercise in skeletal muscle has great significance for the improvement of sports performance, the prevention and treatment of some metabolic disorders. OBJECTIVE: To discuss the mechanism of adaptation to exercise in skeletal muscle. METHODS: An online search of PubMed database and CNKI was performed for relevant articles published before March 2011, using key words of "skeletal muscle, exercise, adaptation, cytoskeleton, dystrophin" in English and Chinese, respectively. A total of 56 articles were collected. Articles on the mechanism of adaptation to exercise in skeletal muscle were included. A number of 31 articles were retained after excluding the repetitive ones. RESULTS AND CONCLUSION: Intense exercise can cause stress reaction in muscle structure and cell metabolism, such as muscle damage and oxidative stress. High-strength eccentric activities may lead to the damage of muscle ultrastructure, but the muscle shows a remodeling response after exercise-induced damage. Exercise training can promote various adaptations of healthy individuals to nitric oxide system. These adaptations can somehow enhance the biological availability of skeletal muscle, consequently increase the exercise capacity and provide protection to the cardiovascular system. At present, the mechanism of adaptation to exercise in human skeletal muscle is still unclear.


Zhao X.,Shijiazhuang Mechanical Engineering College | Chen G.,Hebei Institute of Communication | Gao L.,Shijiazhuang Mechanical Engineering College
Advanced Materials Research | Year: 2013

HLA (High Level Architecture) is a distributed simulation framework; it has the advantage of portability, and reusable. This paper introduces HLA in the field of the equipment support efficiency evaluation simulation. It analyzes the basic principles of HLA and federal development process. The operating work and function are analyzed. The paper designed 9 modules for the equipment support efficiency evaluation simulation system base on HLA. The physical structure and logical structure are designed at last. © (2013) Trans Tech Publications, Switzerland.


Liang W.,Shijiazhuang Mechanical Engineering College | Jia J.,Hebei Institute of Communication | Liu A.,Military Simulation Training Center | Hao J.,Shijiazhuang Mechanical Engineering College
Applied Mechanics and Materials | Year: 2012

As an important engineering work, maintainability design, analysis, evaluation and other activities runs through the entire weapon equipment development process. To solve the current maintenance puzzle in the beginning, and let the maintenance in time, economic and effective, this paper build up the weapon equipment maintain-ability lifecycle models from function view, information view and process view oriented on the concurrent engineering (CE). Accordingly, put the maintainability design, analysis and evaluation works in to practice throughout the weapon equipment system analysis, design, manufacture, test, evaluation and other engineering activities in the earlier phase of weapon equipment system demonstration, thus can make the equipment have the best maintainability character by the roots. © (2012) Trans Tech Publications, Switzerland.


Zhao T.,Hebei Normal University | Qi F.X.,Hebei Normal University | Zhang Y.M.,Hebei Normal University | Liang L.,Hebei Institute of Communication | And 2 more authors.
Proceedings of the International Conference on Management, Information and Educational Engineering, MIEE 2014 | Year: 2015

Since the introduction of animation industry support policies, the development of the cartoon industry in Hebei province has experienced for eight years. So far, there are still many problems in technology and creativity in Hebei animation works. This paper starts with the creative technology and creative resources of Hebei animation, and analyzes the animation status and development strategy research in our province. It is believed that the Hebei animation should suit the local conditions, to maintain cooperation with large animation enterprises at home and abroad to processing the relationship, for the accumulation of capital means the growth of existing animation enterprises, learning advanced technology and experience at home and abroad at the same time. Strengthening the cooperation between colleges and enterprises, pay attention to the cultivation of talents for classification, suitable and willing to learn digital 3D and interactive technology personnel specialized training for the quick mature, so as to adapt to the society and the needs of the enterprise. In addition, Hebei province animation creation should be from our own cultural tourism resources, not only can produce original animation works, but also can make an important contribution to protect and promot the tourism resources in this province. © 2015 Taylor & Francis Group, London.


Zhang Q.,Hebei Institute of Communication | Li K.,North China Electrical Power University | Yang H.,North China Electrical Power University
2010 2nd Conference on Environmental Science and Information Application Technology, ESIAT 2010 | Year: 2010

Intrusion Detection is an indispensable component of Network Security. Because exists the problems of the high false positives rate and low detection efficiency in the current intrusion detection system, in this paper, we propose a hybrid intrusion detection model and improve intrusion detection system analyzer, applying the Data fusion and data mining techniques to intrusion detection systems. We have researched this model further more and analyzed its architecture in detail. ©2010 IEEE.


Yang Y.,Yunnan University | Wang Y.,Hebei Institute of Communication
Proceedings - 2014 IEEE Workshop on Electronics, Computer and Applications, IWECA 2014 | Year: 2014

Portal as one of the visibility determination methods is widely used for large scale indoor scene. With the deepening research, we find that portal can do more works than we thought, including simulating mirror, connecting cells and dividing cells more simply. In this paper, first, we give the basic conception of portal, analyze the status and development trend of it, and divide portal into two categories: conventional portal and arbitrary portal. Conventional portal is a planar portal, defined on cell boundaries and used to form a CPG graph connecting the cells of the subdivision. Arbitrary portal is non-planar portal, can be any arbitrary surface, so it may exist anywhere within a cell or outside the indoor scene and connect to any space with an adjacent cell. Then, we describe the detail development of each type, comparing their difference and the different methods about portal. Finally, we point out some key research issues that need to be studied in the future. © 2014 IEEE.


Li Z.,Ordnance Engineering College | Wang J.,Ordnance Engineering College | Mi W.,Hebei Institute of Communication | Yu L.,Ordnance Engineering College
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering | Year: 2015

The Zn-Ti barium ferrite hollow ceramic microsphere microwave absorption materials have been prepared with a self-reactive quenching method, which are new type microwave absorption materials with a core/shell structure and a lower density than general ferrite. From the SEM, EDS and XRD analyses, the results show that the materials have a middle hollow structure, the ball shape is regular and the particle size distribution is uniform. After heat treatment, the noncrystalline phases have been translated into crystalline phase and the most constituent phases are BaZnTiFe10O19 and BaFe12O19. From the test of microwave absorption property, the hollow ceramic microsphere material has the performance of microwave absorbing. Moreover, after heat treatment the microwave absorption properties have been raised. The lowest reflection rate is -21.98 dB and the reflection rate less than -10 dB frequency bands width is more than 2 GHz. ©, 2015, Rare Metals Materials and Engineering Press. All right reserved.


Wang Y.,Hebei Institute of Communication | Yang Y.,Yunnan University
Proceedings - 2014 IEEE Workshop on Advanced Research and Technology in Industry Applications, WARTIA 2014 | Year: 2014

Ground on features of application systems with workflow as the core, this paper tailors 'software process based on workflow', which focuses on three areas: workflow diagrams, user task interface, and business logic. In addition to, it analyzes and defines the basic tasks, the basic roles and basic working product to complete these three areas. This paper is to draw up development steps and illustrate system software architecture with this software Processing The experimental example show that 'software process based on workflow' could greatly improve quality and efficiency of application system product. © 2014 IEEE.


Li Z.,Ordnance Engineering College | Wang J.,Ordnance Engineering College | Mi W.,Hebei Institute of Communication
Qiangjiguang Yu Lizishu/High Power Laser and Particle Beams | Year: 2015

The M-type barium ferrite hollow ceramic microsphere microwave absorption materials were prepared with self-reactive quenching method. The Ni-Co composite layers were plated on the surface of the materials by using ultrasonic chemical electroless plating method. The materials had the core-shell-hollow structure. From the SEM, EDS and XRD analyzsis, the results show that the materials have middle hollow structure and its phase BaFe12O19 is M-type barium ferrite. The surface of the materials was plated with Ni-Co composite layers by using chemical electroless plating. From the test of microwave absorption property, after chemical electroless plating its microwave absorption properties were raised. The lowest reflection rate was -28.62 dB and the band width less than -10 dB was 3.33 GHz in the frequency range of 2-18 GHz when the thickness was 2.10 mm. ©, 2015, Editorial Office of High Power Laser and Particle Beams. All right reserved.

Loading Hebei Institute of Communication collaborators
Loading Hebei Institute of Communication collaborators