Guangdong Textile Polytechnic

Foshan, China

Guangdong Textile Polytechnic

Foshan, China
SEARCH FILTERS
Time filter
Source Type

Zeng H.,Guangdong Textile Polytechnic | Liu D.,Guangdong Textile Polytechnic | Xin G.,Guangzhou Xinzhijie Electronics Factory
2011 International Conference on Multimedia Technology, ICMT 2011 | Year: 2011

This paper describes a cost-effective motion-picture styled LED displaying controlling system based on single-chip computer, including hardware structure equipped with a mother control board, a sub-control board and displaying driving circuits. Moreover, this paper also provides with a detailed software design flow-chart. A new generation of MCU is selected which is manufactured domestically. It is characteristics of high speed, low dissipation and super high anti-interference. It's command system is compatible with 8051. Moreover, a SPI is chosen between the mother board and the SD card to make the communication even sampler and more efficient. In addition, the communication between the mother board and it's sub-mother board is achieved by a Half-duplex styled 485. © 2011 IEEE.


Wang Y.,Guangdong Textile Polytechnic | Xu H.S.,Luoyang Normal University
Proceedings - 2010 3rd International Conference on Biomedical Engineering and Informatics, BMEI 2010 | Year: 2010

Web services represent a step forward in enabling collaborations between various entities on the web and in overcoming the interoperability problems that may appear. This study proposes an adaptive fuzzy detector to detect the R peak correctly. This paper describes the various auction processes that could be entered into and, as an illustrative example, it describes how web services execution environment could be used to implement an auction process. We show how emerging semantic web services technologies such as the web services execution environment facilitate the creation of such applications, and an experimental platform has been constructed to test the performance of the agent. The experimental results show that the proposed approach can work effectively. ©2010 IEEE.


Li X.,Hunan University | Wang J.,Guangdong Textile Polytechnic | Guo C.,Hunan University
Advanced Materials Research | Year: 2012

To investigate the efficiency of nano-antibacterial finishing methods we compared the advantages and disadvantages of the current antibacterial method and presented out a newly finishing technics based on the nano-zinc-oxide material. Moreover the experimental study and optimal choice were carried out for the formulations of finishing agent in its preparation. The results shown that by adapting the zinc-oxide based formulated compound with the special technics the antibacterial effect is obvious. The antibacterial effect of the textile has no significant change after soaping and water washing 10 times or above. © (2012) Trans Tech Publications Switzerland.


Zhou Y.,Institute Of Design Shunde Polytechnic | Lv T.,Guangdong Textile Polytechnic
2011 International Conference on Electric Technology and Civil Engineering, ICETCE 2011 - Proceedings | Year: 2011

Lingnan decorative ridge of pottery modellings was one of the Two Types of Sculptures of the Lingnan traditional decorations, and is the unique decorative on Lingnan buildings. There are only five buildings in China whose decorative ridges of pottery modellings are better complete today. They are Chen's Ancestor Temple, Foshan Ancestral Temple, Xujiang Ancestral Temple, Yuecheng Longmu Ancestral Temple and Chongxu Taoist-temple of Mountain Luofu, excluding Hong Kong, Macao and Taiwan. There are a total of 33 decorative ridges of pottery modellings of Qing Dynasty on them. Lingnan decorative ridges of pottery modellings are facing the danger of faultage in the contemporary era, which distributed widely in Lingnan and Southeast Asia those days and decreased so greatly that they only exist on several buildings today. Only by clarifying the origin and development of decorative ridges of pottery modellings, we could effectively protect and inherit them. After the preliminary study Lingnan decorative ridges of pottery modellings which are still existing, we got the trace of development of decorative ridges of pottery modellings roughly. We probe into origin of the decorative ridges of pottery modellings, its relationship with antique-shelf roof, the development of its theme and expressing techniques, its position in the decorations of Lingnan Architecture, as well as the progressive thinking embeded in it, and the system of their potters. © 2011 IEEE.


Tang Q.,Guangdong Textile Polytechnic
Wool Textile Journal | Year: 2010

Antifehing finishing of wool was carried out with protease, H 2O2, DCCA, H2 O2/protease, DCCA/protease respectively. The enzyme loss, surface wettability, dyeing-rate fastness of the wool before and after treatment were studied. While discussing the effect of H2O2 and DCCA pretreatments on the protease antifehing finishing of wool dyeing on low temperuture, the results showed that weight loss was equal between 40 mL/L H2O2 and 3% DCCA(owf) pretreatments on the protease. The wettability of wool fabrics finished by DCCA/protease was better, while the contact angle and saturation time dropped distinctively when DCCA/H2O2 pretreatment wasperformed followed by protease treatment. The scales of dyeing temprature on the wool fabric was stripped to 68-72 °C, the dyeing-rate could exceed 80% , the soaping fastness and friction fastness of wool fabric was not distinctly varied.


Wang Y.,Guangdong Textile Polytechnic
Proceedings of SPIE - The International Society for Optical Engineering | Year: 2011

The role of this ontology is to provide a shared vocabulary and semantics between domain knowledge and vision. Ontology presents semantics for interpreting data instances. Formal concept lattices and rough set theory are two kinds of complementary mathematical tools for data analysis and data processing. The paper proposes the method of constructiong ontology nodes information system based on rough formal concept analysis in order to constructing the ontology model of knowledge management. Experimental studies are done with rough set and FCA in constructing the numbers of ontology nodes. The experimental results indicate that this method has great promise and is showing that ROUGH SET is superior to FCA in building the numbers of ontology nodes. © 2011 Copyright Society of Photo-Optical Instrumentation Engineers (SPIE).


Wang Y.,Guangdong Textile Polytechnic | Luo J.,Guangdong Textile Polytechnic
Journal of Convergence Information Technology | Year: 2012

Ontology learning is a sub-task of information extraction, the goal is automatic or semiautomatically from a given corpus or data source to extract concepts and relations. Ontology mapping is to calculate the two main elements of the similarity between ontology, the similarity between elements and ontology definition, ontology and ontology-related rules or constraints. Ontology and formal concept analysis are derived from the philosophy, concept lattice formed by the relationship between the level concept, connotation and extension of the concept of form. This paper presents to ontology learning and mapping in semantic web based on formal concept analysis. The experimental results show that this method can effectively improve the performance of the concept and semantic information in semantic web.


Zheng Q.,Guangdong Textile Polytechnic | Wang Y.,Guangdong Textile Polytechnic
Journal of Convergence Information Technology | Year: 2012

Collaborative filtering is the most studied personalized recommendation technology. Collaborative filtering recommendation systems are used widely in e-commerce website and it is by far the most successful information filtering technologies. Formal concept analysis is a tool for data analysis or approach, especially given the information can be analyzed and processed. This paper presents to construct recommendation system of e-commerce by formal concept analysis and collaborative filtering to make up for these the shortcomings of existing e-commerce recommendation system. The experimental results show that this method can effectively improve the performance of the recommendation system.


Wang Y.,Guangdong Textile Polytechnic | Zhang J.,Guangdong Textile Polytechnic | Xu H.,Guangdong Textile Polytechnic
Advances in Intelligent and Soft Computing | Year: 2012

Data collection is one of the main research topics of wireless sensor networks in recent years, and, data collection research outside users through wireless sensor networks to collect perception data from the monitoring area. Formal concept analysis is a data analysis tool, especially for investigation and treatment can be given information to discover important information hidden in the data behind. This paper proposes the data collection methods in Wireless Sensor Networks based on formal concept analysis. Experiments show that the proposed FCA-based data collection algorithm in WSN more effective than the traditional algorithm. © 2012 Springer-Verlag GmbH.


Zheng Q.,Guangdong Textile Polytechnic | Wang Y.,Guangdong Textile Polytechnic
Advances in Intelligent and Soft Computing | Year: 2012

Semi-supervised classification algorithm using a large number of unlabeled data supporting the supervised learning process to improve the classification results. Web service composition is a complex interaction between the execution order to determine the different Web services and Web services. This article focuses on the semi-supervised clustering algorithm based on tags and constraints. The paper presents the application of Semi-supervised clustering in web services composition. The compared experimental results indicate that this method has great promise. © 2012 Springer-Verlag GmbH.

Loading Guangdong Textile Polytechnic collaborators
Loading Guangdong Textile Polytechnic collaborators