Shāhjahānpur, India
Shāhjahānpur, India

Time filter

Source Type

Rahamah Bivi M.S.H.,Malaysian Palm Oil Board | Khairulmazmi A.,University Putra Malaysia | Akhtar M.S.,Gandhi Faiz E Aam College | Idris A.S.,Malaysian Palm Oil Board
Plant Pathology Journal | Year: 2016

Continuous supplementation of mineral nutrients and salicylic acid (SA) as foliar application could improve efficacy in controlling basal stem rot (BSR) disease in oil palm seedling. It is revealed from the results that the highest disease severity index (58.3%) was recorded in T8 treatments at 9 months after inoculation. The best disease control was achieved by T7 treatments (calcium/copper/SA [Ca/Cu/SA]) (5.0%) followed by T1 (5.5%), T5 (5.8%), T3 (8.3%), T6 (8.3%), T4 (13.3%), and T2 (15.8%) treatments. Continuous supplementation of Ca/Cu/SA was found to be the most effective in controlling the disease and the high performance liquid chromatography results showed the detection of ergosterol at very low concentration in the treated samples. Moreover, the transmission electron microscopy analysis results clearly indicated that T7 treatment was also enhancing lignification, which was responsible for the thickness of the secondary cell walls and middle lamella compared to untreated samples. It was therefore, concluded that continuous supplementation of minerals nutrients and SA could effectively suppress disease severity by reducing ergosterol activity and also improve the process of lignification in the treated plants. Furthermore, this treatment also managed to delay the onset of BSR symptoms and promote the growth of the seedlings and eventually suppress the BSR disease. © The Korean Society of Plant Pathology.


PubMed | University Putra Malaysia, Gandhi Faiz E Aam College and Malaysian Palm Oil Board
Type: Journal Article | Journal: The plant pathology journal | Year: 2016

Continuous supplementation of mineral nutrients and salicylic acid (SA) as foliar application could improve efficacy in controlling basal stem rot (BSR) disease in oil palm seedling. It is revealed from the results that the highest disease severity index (58.3%) was recorded in T8 treatments at 9 months after inoculation. The best disease control was achieved by T7 treatments (calcium/copper/SA [Ca/Cu/SA]) (5.0%) followed by T1 (5.5%), T5 (5.8%), T3 (8.3%), T6 (8.3%), T4 (13.3%), and T2 (15.8%) treatments. Continuous supplementation of Ca/Cu/SA was found to be the most effective in controlling the disease and the high performance liquid chromatography results showed the detection of ergosterol at very low concentration in the treated samples. Moreover, the transmission electron microscopy analysis results clearly indicated that T7 treatment was also enhancing lignification, which was responsible for the thickness of the secondary cell walls and middle lamella compared to untreated samples. It was therefore, concluded that continuous supplementation of minerals nutrients and SA could effectively suppress disease severity by reducing ergosterol activity and also improve the process of lignification in the treated plants. Furthermore, this treatment also managed to delay the onset of BSR symptoms and promote the growth of the seedlings and eventually suppress the BSR disease.


Moheman A.,Jamia Hamdard University | Moheman A.,Gandhi Faiz E Aam College | Alam M.S.,Jamia Hamdard University | Mohammad A.,Aligarh Muslim University
Advances in Colloid and Interface Science | Year: 2015

Fabrication of polymer derived electrospun nanofibers by electrospinning as chromatographic sorbent bed for ultra-thin layer chromatography (UTLC) is a very demanding topic in analytical chemistry. This review presents an overview of recent development in the fabrication of polymer derived electrospun nanofibers and their applications to design UTLC plates as stationary phases for on-plate identification and separation of analytes from their mixture solutions. It has been reported that electrospun fiber based stationary phases in UTLC have enhanced separation efficiency to provide separation of analyte mixture in a shorter development time than those of traditional particle-based TLC stationary phases. In addition, electrospun UTLC is cost effective and can be modified for obtaining different surface selectivities by changing the polymer materials to electrospun devices. Electrospun UTLC plates are not available commercially till date and efforts are being rendered for their commercialization. The morphology and diameter of electrospun nanofibers are highly dependent on several parameters such as type of polymer, polymer molecular weight, solvent, viscosity, conductivity, surface tension, applied voltage, collector distance and flow rate of the polymer solution during electrospinning process. Among the aforementioned parameters, solution viscosity is an important parameter which is mainly influenced by polymer concentration. This review provides evidence for the fabrication of UTLC plates containing electrospun polymer nanofibers. Furthermore, the future prospects related to electrospinning and its application in obtaining of different types of electrospun nanofibers are discussed. The present communication is aimed to review the work which appeared during 2009-2014 on the application of polymer derived electrospun nanofibers in ultra thin layer chromatography. © 2015 Elsevier B.V.


Ashkani S.,University Putra Malaysia | Ashkani S.,Islamic Azad University at Tehran | Rafii M.Y.,University Putra Malaysia | Shabanimofrad M.,University Putra Malaysia | And 8 more authors.
Frontiers in Plant Science | Year: 2015

Rice is a staple and most important security food crop consumed by almost half of the world’s population. More rice production is needed due to the rapid population growth in the world. Rice blast caused by the fungus, Magnaporthe oryzae is one of the most destructive diseases of this crop in different part of the world. Breakdown of blast resistance is the major cause of yield instability in several rice growing areas. There is a need to develop strategies providing long-lasting disease resistance against a broad spectrum of pathogens, giving protection for a long time over a broad geographic area, promising for sustainable rice production in the future. So far, molecular breeding approaches involving DNA markers, such as QTL mapping, marker-aided selection, gene pyramiding, allele mining and genetic transformation have been used to develop new resistant rice cultivars. Such techniques now are used as a low-cost, high-throughput alternative to conventional methods allowing rapid introgression of disease resistance genes into susceptible varieties as well as the incorporation of multiple genes into individual lines for more durable blast resistance. The paper briefly reviewed the progress of studies on this aspect to provide the interest information for rice disease resistance breeding. This review includes examples of how advanced molecular method have been used in breeding programs for improving blast resistance. New information and knowledge gained from previous research on the recent strategy and challenges towards improvement of blast disease such as pyramiding disease resistance gene for creating new rice varieties with high resistance against multiple diseases will undoubtedly provide new insights into the rice disease control. © 2015 Ashkani, Rafii, Shabanimofrad, Miah, Sahebi, Azizi, Tanweer, Akhtar and Nasehi.


PubMed | University Putra Malaysia, University of Sargodha, Gandhi Faiz E Aam College, University of Agriculture at Faisalabad and Ege University
Type: | Journal: Reviews of environmental contamination and toxicology | Year: 2016

Increased use of nitrogenous (N) fertilizers in agriculture has significantly altered the global N-cycle because they release nitrogenous gases of environmental concerns. The emission of nitrous oxide (N


PubMed | Gandhi Faiz E Aam College and Birla Institute of Technology and Science
Type: | Journal: Ecotoxicology (London, England) | Year: 2017

Rapid utilization of nano-based products will inevitably release nanoparticles into the environment with unidentified consequences. Plants, being an integral part of ecosystem play a vital role in the incorporation of nanoparticles in food chain and thus, need to be critically assessed. The present study assesses the comparative phytotoxicity of nanoparticle, bulk and ionic forms of zinc at different concentrations on selected plant species with varying seed size and surface anatomy. ZnO nanoparticles were chosen in view of their wide spread use in cosmetics and health care products, which allow their direct release in the environment. The impact on germination rate, shoot & root length and vigour index were evaluated. A concentration dependent inhibition of seed germination as well as seedling length was observed in all the tested plants. Due to the presence of thick cuticle on testa and root, pearl millet (xerophytic plant) was found to be relatively less sensitive to ZnO nanoparticles as compared to wheat and tomato (mesophytic plants) with normal cuticle layer. No correlation was observed between nanoparticles toxicity and seed size. The results indicated that variations in surface anatomy of seeds play a crucial role in determining the phytotoxicity of nanoparticles. The present findings significantly contribute to assess potential consequences of nanoparticle release in environment particularly with major emphasis on plant systems. It is the first report which suggests that variations observed in phytotoxicity of nanoparticles is mainly due to the predominant differences in size and surface anatomy of tested plant seeds and root architecture. Effect of various concentrations of nano ZnO, bulk ZnO and zinc sulphate on the growth of pearl millet (A), tomato (B) and wheat (C) seedlings.

Loading Gandhi Faiz E Aam College collaborators
Loading Gandhi Faiz E Aam College collaborators