Cerri R.,Eni SpA Upstream and Technical Services |
Di Martino S.,Eni SpA Upstream and Technical Services |
Balossino P.,Eni SpA Upstream and Technical Services |
Gioacchini L.,Eni SpA Upstream and Technical Services |
And 4 more authors.
Society of Petroleum Engineers - SPE Middle East Unconventional Resources Conference and Exhibition 2015 - The Journey of Unconventional Resources: From Exploration to Successful Development | Year: 2015
Shale gas reservoir quality evaluation is a technical challenge as conventional log interpretation methods and even core measurements may be inadequate or inaccurate. Only through a robust integration of core and logs data, a reliable estimation of the gas in place can be obtained and the interval with the best petrophysical and geomechanical characteristics (sweet spot) identified. Total GUP estimation is derived from core and log analyses and can be complemented by measuring desorbed gas from selected core samples. Total gas content is the combination of measured and estimated gas components: lost gas, desorbed gas and residual gas. Lost gas is the most critical component being usually extrapolated from desorbed data to time zero using linear and/or polynomial curve fitting. Total gas can now be directly measured by using a new controlled pressure coring technology able to capture a full sized core and retain all the hydrocarbons contained in the rock, eliminating gasses and/or liquids lost during conventional coring techniques. The characterization of the lower Barnett Shale described in this paper was achieved by coring the whole sequence: several samples from conventional cores were taken for desorption analysis and three pressure cores were placed to target the main shale facies identified from the integrated reservoir model. Core gas data from both desorption and pressure coring were integrated for a more reliable total gas estimation; consistent relationships among handling time, gas content and method used for deriving lost gas were also observed. Obtained total gas values were in good agreement with calculated gas volumes from logs. In addition, the combined application of pressure coring and desorption analysis in the Barnett Shale has allowed to improve well site procedures for optimal core data acquisition and to define the best approach for a robust shale gas evaluation. Copyright 2015, Society of Petroleum Engineers.