Time filter

Source Type

Rostock, Germany

Schmidt A.,DOT GmbH
Current Problems in Dermatology (Switzerland) | Year: 2015

The following excerpt is taken from the hygiene guidelines written by Deutsche Organisierte Tätowierer (DOT e.V. Germany; German Association of Professional Tattoo Artists) and United European Tattoo Artists e.V. (UETA). It has been published with the intention of creating a standard that is understandable and accomplishable in practice, focusing on a minimum standard level that guarantees the highest possible safety for tattooists and customers at the same time. The DOT and UETA consistently strive to participate in the research of tattoo hygiene and tattoo colours because important insider information can be provided by professional tattoo artists with many years of work experience. © 2015 DOT/UETA. Source

Ten Broeke R.H.M.,Maastricht University | Alves A.,Maastricht University | Alves A.,Biomatech Namsa Company | Baumann A.,Maastricht University | And 3 more authors.
Journal of Bone and Joint Surgery - Series B | Year: 2011

Four uncemented Symax hip stems were extracted at three weeks and nine, 13 and 32 months, respectively, for reasons other than loosening. The reasons for implant removal were infection in two cases, recurrent dislocation in one and acetabular fracture in one. They were analysed to assess the effect and behaviour of an electrochemically deposited, completely resorbable biomimetic BONIT-hydroxyapatite (HA) coating (proximal part) and a DOTIZE surface treatment (distal part) using qualitative histology, quantitative histomorphometry and scanning electron microscopy (SEM). Early and direct bone-implant bonding with signs of active remodelling of bone and the HA coating were demonstrated by histology and SEM. No loose BONIT-HA particles or delamination of the coating were observed, and there was no inflammation or fibrous interposition at the interface. Histomorphometry showed bone-implant contact varying between 26.5% at three weeks and 83.5% at 13 months at the HA-coated implant surface. The bone density in the area of investigation was between 24.6% at three weeks and 41.1% at 32 months. The DOTIZE surface treatment of the distal part of the stem completely prevented tissue and bone apposition in all cases, thereby optimising proximal stress transfer. The overall features of this implant, in terms of geometry and surface texture, suggest a mechanically stable design with a highly active biomimetic coating, resulting in rapid and extensive osseo-integration, exclusively in the metaphyseal part of the stem. Early remodelling of the HA coating does not seem to have a detrimental effect on short-term bone-implant coupling. There were no adverse effects identified from either the BONIT-HA coating or the DOTIZE surface treatment. ©2011 British Editorial Society of Bone and Joint Surgery. Source

Fabry C.,University of Rostock | Herrmann S.,University of Rostock | Kaehler M.,University of Rostock | Klinkenberg E.-D.,DOT GmbH | And 2 more authors.
Medical Engineering and Physics | Year: 2013

At present, wear investigations of total hip replacements are performed in accordance with the ISO standard 14242, which is based on simplified kinematic and force data of the gait cycle. The aim of this analytical study was to generate parameter sets of daily life activities in order to replicate more realistic joint load situations in wear testing. Hence, published in vivo motion and force data of daily life activities were evaluated and adjusted using analytical techniques. The created kinematically and dynamically consistent parameter sets comprised time trajectories of three Cardan angles to describe the motion of the femur with respect to the pelvis and time trajectories of three force components, representing the hip joint contact force. The parameter sets include the activities of walking, knee bending, stair climbing and a combined load case of sitting down and standing up. Additionally, a motion sequence following the frequency of daily life activities was presented. Differences of the evaluated angular motions and joint contact forces in comparison to the ISO standard 14242-1 were pointed out. The results of this study offer the possibility to extend the kinematics and dynamics of the ISO standard test protocol and to support the loading conditions of hip wear simulators with a comprehensive set of motions and loads close to reality. © 2012 IPEM. Source

In a method and apparatus for coating catheters or balloon catheters the catheter or balloon catheter is radially surrounded completely or almost completely at a constant distance by a device that applies a coating solution so that the coating solution completely fills the space between the catheter or balloon catheter and the device and thus completely surrounds the catheter or balloon catheter, relative motion is effected between the device and the catheter or balloon catheter in the axial direction across the surface of the catheter or balloon catheter multiple times, and partial drying of the applied coating solution occurs between the individual coating stages.

The invention relates to the antibacterial coating for an implant, which is characterized in that the coating contains copper. The invention also relates to a method of producing an antibacterial coating for an implant, the coating being applied by means of a PVD process, and the method being characterized in that the layer generated contains a copper content.

Discover hidden collaborations