Binzhou Vocational College
Binzhou Vocational College
Yu E.,Bohai University |
Hu Y.,Binzhou Vocational College
Proceedings of the 28th Chinese Control and Decision Conference, CCDC 2016 | Year: 2016
Temperature control is the common problems in the process of industrial production. Because the temperature system is a kind of time-varying nonlinear system, this gives the temperature real-time control has brought the certain difficulty. In order to solve this problem, this paper designed a kind of self-tuning PID control system. It puts the model parameter online identification and controller online design organic unifies in together, parameter identification using fading memory recursive least squares algorithm, and the controller adopts the pole assignment algorithm. This makes the control system not only can online real-time adjustment of parameters, but also ensure that the actual closed-loop system converges to zero pole expectations of zero pole, achieve good control effect. At the same time, aiming at the limitation of the cable temperature measurement technology, this paper designs the wireless acquisition function of multipoint temperature. Simulation results prove the effectiveness of the proposed method. © 2016 IEEE.
Yin G.L.,Binzhou Vocational College
Advanced Materials Research | Year: 2014
Safety problem is one of the most attention and concern of driving. This paper in the high-speed on the road cars and car, car and road communications, vehicle real-time status, through the network information service system integration on a platform, on the use of related technologies are analyzed, the design of the software system based on SOA architecture. © (2014) Trans Tech Publications, Switzerland.
Yu C.,Binzhou Vocational College
International Journal of Simulation: Systems, Science and Technology | Year: 2016
With the rapid development of online social networks, such as social networking services, microblog blog, etc., a real new media age has gradually arrived. Everyone can create their own web content and spread out quickly through online social networks. Massive data has brought severe challenge to public opinion monitoring. We will introduce a microblog public opinion monitoring system based on the Hadoop. It can mine and analyze large scale collected data, realize detection and tracking of hot topics perform social network analysis on the microblog. Network public opinion analysis focuses more on the huge amounts of data collection, storage, cleaning and text clustering, so the traditional public opinion research method only based on data mining is no longer held. This paper summarizes the related literature of the research, sums up the basic process of network public opinion analysis framework, and how to use the distributed computing in all stages of text clustering, thus improving the accuracy and timeliness of the network public opinion analysis. The proposed system will provide automated, systematic, and scientific information support for party and government organizations, enterprises and other units and organizations to detect sensitive information timely, grasp the hot points and the trend of public opinion. © 2016, UK Simulation Society. All rights reserved.
Zhang J.L.,Binzhou Vocational College |
Zhang A.R.,Binzhou Vocational College |
Zhang Z.L.,Binzhou Vocational College
Applied Mechanics and Materials | Year: 2014
In the environment of the high speed development of industrial production, how to optimize the manufacture process, improve efficiency of the industrial step according to the modern industrial technology, is a key problem about industrial development. The traditional model of mass production way already can not adapt to development needs.Because of this, embedded configuration technology just puts forward in the history background. The technology, with its mature and stable control effect, is widely used in the automatic production line. In this paper, the research background come from PLC automatic production lines' project in the National Electrical Automation Contest, simulating a quite complicated series of mixture, stirring steps about several kinds of materials which are used in industries. Practice proves that this system can ensure the product quality and needs to produce in large quantities and fulfill complex production requirement and raise production efficiency. © (2014) Trans Tech Publications, Switzerland.
Su F.,Binzhou Vocational College
Proceedings - 2013 4th International Conference on Intelligent Systems Design and Engineering Applications, ISDEA 2013 | Year: 2013
In recent years, with the development of computer sciences, computer technology has been applied to comprehensive fields. As the quality of people's life increasing, tourism businesses are developing very fast in China, and new tourist attractions are coming out in many places. The management of the data becomes an interesting topic. When people travel they often need to search for the optimal combination of sight spots and the corresponding best travel tour, the shortest driving directions in detail between any two points, the best bus path between any two points in a city, and so on. Now people can get from a travel agency or search online in the web for tourism route, but these routes are usually not optimal and made from the experiences. There are also some services for people searching for the bus path in a city, but this is often limited, and does not work for any two points in a city. For the shortest driving directions between any two points, we still do not have this kind of services in the range of the whole country, though people in the U. S. Are used to searching online for driving directions before going out. In this paper, we try to solve all these problems. We propose several algorithms to design the optimal combination of sight spots by filtering tourist attractions, and the main method is by listing all maximal cliques. We then compute the optimal travel route on this combination. This will help people to choose their attractions pots to visit and get the best tour. For other problems which people often encounter in travelling such a show to get the shortest driving directions between any two points, and optimal bus path when using public transportations, we discuss the existing algorithms and propose the practical solutions. All algorithms proposed in this paper are suitable for large scale settings such as applying to millions of tourism sight spots to list all optimal tours etc. The key point is to deal with very large amount of data, for which we must adopt high performance computing. At the end of the paper, computational results are discussed and concluded that our algorithms and designs are suitable for real applications and this will make it much easier for peoples' life. © 2013 IEEE.
Shao F.,Binzhou Vocational College
2010 International Conference on Multimedia Technology, ICMT 2010 | Year: 2010
In this paper a finite element analysis (FEA) of machining for AISI1045 is presented. In particular, the thermodynamical constitutive equation (T-C-E) in FEA is applied for both workpiece material and tool material. Cutting temperature and tool wear depth are predicted. The comparison between the predicted and experimental cutting temperature and tool wear depth are presented and discussed. The results indicated that a good prediction accuracy of both principal cutting temperature and tool wear depth can be achieved by the method of FEA with thermodynamical constitutive equation. ©2010 IEEE.
Liyan G.,Binzhou Vocational College
2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011 | Year: 2011
Digital Art in China itself is still in the early stages of development, so it is also with the teaching facilities, which limits the number of objective development of art education. In this paper, we start the application of digital art teaching in China University of Fine Arts, which not only gives the number of college art teaching art in the application of specific methods, but it also gives the college art courses in applying some recommendations. © 2011 IEEE.
Lao F.,Binzhou Vocational College
Computing, Control, Information and Education Engineering - Proceedings of the 2015 2nd International Conference on Computer, Intelligent and Education Technology, CICET 2015 | Year: 2015
In order to effectively improve forest fire monitoring, the paper presents a new system based on Zigbee and GPRS technology, which consists of some sensor nodes, the coordinator, and monitoring system. This system is able to overcome the traditional drawbacks of forest fire monitoring. This paper discusses in detail the hardware design of the sensor nodes and the coordinator node design. After testing, the system works stability, and is able to effectively complete forest fire monitoring, alarm, and accurately provide the fire alarm according to the node address. It is worthy of promotion and application. © 2015 Taylor & Francis Group, London.
Yin G.,Binzhou Vocational College
Proceedings - 2012 International Conference on Computer Science and Electronics Engineering, ICCSEE 2012 | Year: 2012
Teaching Management Systems is the center work of Vocational College. The paper discuss exist some problems of the current teaching management systems, according to theoretical system based on service-oriented architecture, we propose a sort of architecture and hierarchical model SOA-based about academic management system, develop a integrated platform of teaching information system on web service of J2EE-based. The phenomenon is solved about data islands of teaching management system. © 2012 IEEE.
Li G.X.,Binzhou Vocational College
Applied Mechanics and Materials | Year: 2013
In recent years, as the GAO KAO student numbers in China have been going down, and the size of the undergraduate school enrollment has been increasing. The enrollment of professional colleges are facing a lot of pressure and challenge. This article proposes and designs the Student Service System. Its main purpose is, by using MMS and SMS, for those students who have made the inquiries and inclined to apply for the school, to provide personalized guidance and service during the application process, and to increase the chance of being accepted by the school. The application of this system will increase the application rate and registration rate. And at the same time, it will improve the school's publicity and reputation. Therefore, it fulfills its purpose. © (2013) Trans Tech Publications, Switzerland.